Technicolor-thomson ST585 V6 Instrukcja Użytkownika Strona 1

PowerWLANEthernetDSLInternetThomson ST585v6 (HP)CLI Reference Guide

E-DOC-CTC-20061027-0004 v1.0Contentsvidns server route delete ...

E-DOC-CTC-20061027-0004 v1.0Config Commands76config flushFlush the loaded configuration.SYNTAX:where:i1. This flush command combines all the possible

E-DOC-CTC-20061027-0004 v1.0Config Commands77config list Show the current configuration set.SYNTAX:where:EXAMPLE:RELATED COMMANDS:config list [templat

E-DOC-CTC-20061027-0004 v1.0Config Commands78config loadLoad complete saved (backup) or default configuration file.SYNTAX:where:iUse the command :conf

E-DOC-CTC-20061027-0004 v1.0Config Commands79EXAMPLE:RELATED COMMANDS:=>ip rtlistDestination Source Gateway Intf Mtrc10.0.0.0/24 10.0.0.0/24 10.0.0

E-DOC-CTC-20061027-0004 v1.0Config Commands80config saveStore the current configuration in a backup file.All the existing configurations and modificat

E-DOC-CTC-20061027-0004 v1.0Connection Commands816 Connection CommandsIntroductionThis chapter describes the commands of the connection command group.

E-DOC-CTC-20061027-0004 v1.0Connection Commands82connection appconfigConfigure the available CONN/NAT application helpers.SYNTAX:where:connection appc

E-DOC-CTC-20061027-0004 v1.0Connection Commands83EXAMPLE:RELATED COMMANDS:=>connection applistApplication Proto DefaultPort Traces TimeoutIP6TO4 6t

E-DOC-CTC-20061027-0004 v1.0Connection Commands84connection appinfoDisplay CONN/NAT application specific info.SYNTAX:where:EXAMPLE:RELATED COMMANDS:co

E-DOC-CTC-20061027-0004 v1.0Connection Commands85connection applistList the available CONN/NAT application helpers.SYNTAX:EXAMPLE:RELATED COMMANDS:con

E-DOC-CTC-20061027-0004 v1.0Contentsviienv set ...

E-DOC-CTC-20061027-0004 v1.0Connection Commands86connection bindCreate a new CONN/NAT application helper/port binding.SYNTAX:where:EXAMPLE:RELATED COM

E-DOC-CTC-20061027-0004 v1.0Connection Commands87connection bindlistList the current CONN/NAT application helper/port bindings.SYNTAX:EXAMPLE:RELATED

E-DOC-CTC-20061027-0004 v1.0Connection Commands88connection cleanClean the connection database by forcing timeouts.SYNTAX:where:EXAMPLE:connection cle

E-DOC-CTC-20061027-0004 v1.0Connection Commands89connection clearKill all the connections.SYNTAX:EXAMPLE:connection clear=>connection clearConnecti

E-DOC-CTC-20061027-0004 v1.0Connection Commands90connection configConfigure the connection handling.SYNTAX:where:EXAMPLE:connection config [configchan

E-DOC-CTC-20061027-0004 v1.0Connection Commands91connection debugThe connection debug commandsSYNTAX:where:EXAMPLE:connection debug [trace = <{disa

E-DOC-CTC-20061027-0004 v1.0Connection Commands92connection describeDescribe the streams of a connection.SYNTAX:where:EXAMPLE:connection describe [id

E-DOC-CTC-20061027-0004 v1.0Connection Commands93connection flushFlush the current connection configuration.SYNTAX:connection flush

E-DOC-CTC-20061027-0004 v1.0Connection Commands94connection infoShow all the registered modules with some info.SYNTAX:EXAMPLE:connection info=>conn

E-DOC-CTC-20061027-0004 v1.0Connection Commands95connection listDisplay the currently known connections.SYNTAX:where:EXAMPLE:connection list [nr = <

E-DOC-CTC-20061027-0004 v1.0Contentsviiieth bridge maclist...

E-DOC-CTC-20061027-0004 v1.0Connection Commands96connection refreshInvalidate all the cached decisions.SYNTAX:connection refresh

E-DOC-CTC-20061027-0004 v1.0Connection Commands97connection statsDisplay the connection and stream statistics.SYNTAX:EXAMPLE:connection stats=>conn

E-DOC-CTC-20061027-0004 v1.0Connection Commands98connection timerclearClear the connection timeout to default.SYNTAX:where:EXAMPLE:RELATED COMMANDS:co

E-DOC-CTC-20061027-0004 v1.0Connection Commands99connection timerconfigConfigure the connection timeout handling.SYNTAX:where:EXAMPLE:RELATED COMMANDS

E-DOC-CTC-20061027-0004 v1.0Connection Commands100connection unbindDelete an existing CONN/NAT application helper/port binding.SYNTAX:where:EXAMPLE:RE

E-DOC-CTC-20061027-0004 v1.0CWMP Commands1017 CWMP CommandsIntroductionThis chapter describes the commands of the cwmp (CPE WAN Management Protocol) c

E-DOC-CTC-20061027-0004 v1.0CWMP Commands102cwmp configConfigure the cwmpd as seen from the ACS.SYNTAX:where:cwmp config [state = <{disabled|enable

E-DOC-CTC-20061027-0004 v1.0CWMP Commands103EXAMPLE:maxEnvelopes Set the maximum number of SOAP envelopes sent within one HTTP message.The default is

E-DOC-CTC-20061027-0004 v1.0CWMP Commands104cwmp server configConfigure the cwmpd towards the ACS.SYNTAX:where:EXAMPLE:cwmp server config [url = <s

E-DOC-CTC-20061027-0004 v1.0Debug Commands1058 Debug CommandsIntroductionThis chapter describes the commands of the debug command group.ContentsThis c

E-DOC-CTC-20061027-0004 v1.0Contentsixfirewall list...

E-DOC-CTC-20061027-0004 v1.0Debug Commands106debug execExecute a 'Trace & Debug' command.SYNTAX:where:!This command is for qualified per

E-DOC-CTC-20061027-0004 v1.0DHCP Commands1079 DHCP CommandsIntroductionThis chapter describes the commands of the Dynamic Host Configuration Protocol

E-DOC-CTC-20061027-0004 v1.0DHCP Commands108dhcp relay ruledelete Delete a selection rule from a DHCP forward entry. 142dhcp rule add Add a rule for D

E-DOC-CTC-20061027-0004 v1.0DHCP Commands109dhcp client flushDelete all the DHCP leases.SYNTAX:iThe flush command does not impact previously saved con

E-DOC-CTC-20061027-0004 v1.0DHCP Commands110dhcp client ifaddCreate a DHCP client.SYNTAX:where:EXAMPLE:RELATED COMMANDS:dhcp client ifadd intf = <s

E-DOC-CTC-20061027-0004 v1.0DHCP Commands111dhcp client ifattachActivate a DHCP client.SYNTAX:where:EXAMPLE:RELATED COMMANDS:dhcp client ifattach intf

E-DOC-CTC-20061027-0004 v1.0DHCP Commands112dhcp client ifconfigConfigure a DHCP client.SYNTAX:where:RELATED COMMANDSiUse the command :dhcp client ifr

E-DOC-CTC-20061027-0004 v1.0DHCP Commands113dhcp client ifdeleteDelete a DHCP client.SYNTAX:where:EXAMPLE:RELATED COMMANDS:dhcp client ifdelete intf =

E-DOC-CTC-20061027-0004 v1.0DHCP Commands114dhcp client ifdetachDe-activate a DHCP client and releases its lease.SYNTAX:where:RELATED COMMANDS:ifdetac

E-DOC-CTC-20061027-0004 v1.0DHCP Commands115dhcp client iflistList all the DHCP leases attached to dynamic interfaces.SYNTAX:where:EXAMPLE:EXAMPLE INP

E-DOC-CTC-20061027-0004 v1.0Contentsxhostmgr list ...

E-DOC-CTC-20061027-0004 v1.0DHCP Commands116RELATED COMMANDS:dhcp client ifadd Create a DHCP client.dhcp client ifdelete Delete a DHCP client.

E-DOC-CTC-20061027-0004 v1.0DHCP Commands117dhcp client ifrenewRenew the DHCP lease.SYNTAX:where:EXAMPLE 1:dhcp client ifrenew intf = <string>in

E-DOC-CTC-20061027-0004 v1.0DHCP Commands118EXAMPLE 2:The Thomson ST is configured as DHCP client disabled its Ethernet interface eth0.RELATED COMMAND

E-DOC-CTC-20061027-0004 v1.0DHCP Commands119dhcp client debug clearClear the DHCP client statistics.SYNTAX:EXAMPLE:RELATED COMMANDS:dhcp client debug

E-DOC-CTC-20061027-0004 v1.0DHCP Commands120dhcp client debug statsPrint the DHCP client statistics.SYNTAX:EXAMPLE:RELATED COMMANDS:dhcp client debug

E-DOC-CTC-20061027-0004 v1.0DHCP Commands121dhcp client debug traceconfigModify the DHCP client trace configuration.SYNTAX:where:EXAMPLE:dhcp client d

E-DOC-CTC-20061027-0004 v1.0DHCP Commands122dhcp client rqoptions addAdd a DHCP Option Code to the Parameter Request List.SYNTAX:where:RELATED COMMAND

E-DOC-CTC-20061027-0004 v1.0DHCP Commands123dhcp client rqoptions deleteDelete a DHCP Option Code from the Parameter Request List.SYNTAX:where:RELATED

E-DOC-CTC-20061027-0004 v1.0DHCP Commands124dhcp client rqoptions listList all DHCP Option Codes in the Parameter Request List.SYNTAX:where:RELATED CO

E-DOC-CTC-20061027-0004 v1.0DHCP Commands125dhcp client rqoptions optionlistList all DHCP Option Codes that can be used in the Parameter Request List.

E-DOC-CTC-20061027-0004 v1.0Contentsxiip arpadd ...

E-DOC-CTC-20061027-0004 v1.0DHCP Commands126dhcp client txoptions addAdd an option.SYNTAX:where:EXAMPLE:RELATED COMMANDS:dhcp client txoptions add int

E-DOC-CTC-20061027-0004 v1.0DHCP Commands127dhcp client txoptions deleteDelete an option.SYNTAX:where:RELATED COMMANDS:dhcp client txoptions delete in

E-DOC-CTC-20061027-0004 v1.0DHCP Commands128dhcp client txoptions listList all options.SYNTAX:RELATED COMMANDS:dhcp client txoptions listdhcp client t

E-DOC-CTC-20061027-0004 v1.0DHCP Commands129dhcp client txoptions optionlistLists all DHCP Option Codes that can be used.SYNTAX:RELATED COMMANDS:dhcp

E-DOC-CTC-20061027-0004 v1.0DHCP Commands130dhcp relay addAdd an entry to the DHCP forward list.SYNTAX:where:RELATED COMMANDS:dhcp relay add name = &l

E-DOC-CTC-20061027-0004 v1.0DHCP Commands131dhcp relay debug statsShow the DHCP relay statistics.SYNTAX:EXAMPLE:RELATED COMMANDS:dhcp relay debug stat

E-DOC-CTC-20061027-0004 v1.0DHCP Commands132dhcp relay debug traceconfigModify the DHCP relay trace configuration.SYNTAX:where:EXAMPLE:RELATED COMMAND

E-DOC-CTC-20061027-0004 v1.0DHCP Commands133dhcp relay configSet the DHCP relay configuration settings.SYNTAX:where:EXAMPLE:dhcp relay config [agentin

E-DOC-CTC-20061027-0004 v1.0DHCP Commands134dhcp relay deleteDelete an entry from the DHCP forward list.SYNTAX:where:EXAMPLE:RELATED COMMANDS:dhcp rel

E-DOC-CTC-20061027-0004 v1.0DHCP Commands135dhcp relay flushFlush the DHCP relay settings.SYNTAX:EXAMPLE:iThe flush command does not impact previously

E-DOC-CTC-20061027-0004 v1.0Contentsxiiipqos ef config ...

E-DOC-CTC-20061027-0004 v1.0DHCP Commands136dhcp relay ifconfigConfigure a DHCP relay interface.SYNTAX:where:dhcp relay ifconfig intf = <string>

E-DOC-CTC-20061027-0004 v1.0DHCP Commands137EXAMPLE:=>dhcp relay iflisteth0 :admin state = up oper state = upmax hops = 4trusted = disabled remote

E-DOC-CTC-20061027-0004 v1.0DHCP Commands138dhcp relay iflistShow the configuration of the relay interfaces.SYNTAX:where:EXAMPLE:dhcp relay iflist [in

E-DOC-CTC-20061027-0004 v1.0DHCP Commands139dhcp relay listList the DHCP forward list.SYNTAX:where:EXAMPLE:RELATED COMMANDS:dhcp relay list [name = &l

E-DOC-CTC-20061027-0004 v1.0DHCP Commands140dhcp relay modifyModify an entry from the DHCP forward list.SYNTAX:where:RELATED COMMANDS:dhcp relay modif

E-DOC-CTC-20061027-0004 v1.0DHCP Commands141dhcp relay ruleaddAdd a selection rule to a DHCP forward entry.SYNTAX:where:RELATED COMMANDS:dhcp relay ru

E-DOC-CTC-20061027-0004 v1.0DHCP Commands142dhcp relay ruledeleteDelete a selection rule from a DHCP forward entry.SYNTAX:where:RELATED COMMANDS:dhcp

E-DOC-CTC-20061027-0004 v1.0DHCP Commands143dhcp rule addAdd a rule for DHCP conditional selection.SYNTAX:where:RELATED COMMANDS:dhcp rule add name =

E-DOC-CTC-20061027-0004 v1.0DHCP Commands144dhcp rule debug traceconfigModify DHCP rule trace configuration.SYNTAX:where:dhcp rule debug traceconfig [

E-DOC-CTC-20061027-0004 v1.0DHCP Commands145dhcp rule deleteDelete a DHCP rule.SYNTAX:where:EXAMPLE:RELATED COMMANDS:dhcp rule delete name = <strin

E-DOC-CTC-20061027-0004 v1.0Contentsxiiimbus debug traceconfig ...

E-DOC-CTC-20061027-0004 v1.0DHCP Commands146dhcp rule flushFlush all DHCP rules.SYNTAX:EXAMPLE:RELATED COMMANDS:dhcp rule flush=>dhcp rule listName

E-DOC-CTC-20061027-0004 v1.0DHCP Commands147dhcp rule listList all DHCP rules.SYNTAX:EXAMPLE:RELATED COMMANDS:dhcp rule list=>dhcp rule listName Us

E-DOC-CTC-20061027-0004 v1.0DHCP Commands148dhcp server config Print the DHCP server configuration settings.SYNTAX:where:EXAMPLE:dhcp server config [s

E-DOC-CTC-20061027-0004 v1.0DHCP Commands149dhcp server flushFlush all DHCP server pool and lease entries.SYNTAX:iThe flush command does not impact pr

E-DOC-CTC-20061027-0004 v1.0DHCP Commands150dhcp server policyPrint the DHCP server policy settings.SYNTAX:where:EXAMPLE:dhcp server policy [verifyfir

E-DOC-CTC-20061027-0004 v1.0DHCP Commands151dhcp server debug clearClear the DHCP server statistics.SYNTAX:EXAMPLE:RELATED COMMANDS:dhcp server debug

E-DOC-CTC-20061027-0004 v1.0DHCP Commands152dhcp server debug statsShow the DHCP server statistics.SYNTAX:EXAMPLE:DESCRIPTION:> DHCP server state:

E-DOC-CTC-20061027-0004 v1.0DHCP Commands153> Ping table got full: whether the history list of IP address pings got full or not. These pings are se

E-DOC-CTC-20061027-0004 v1.0DHCP Commands154dhcp server debug traceconfigModify the DHCP server trace configuration.SYNTAX:where:EXAMPLE:dhcp server d

E-DOC-CTC-20061027-0004 v1.0DHCP Commands155dhcp server lease add Add a DHCP server lease.SYNTAX:where:dhcp server lease add clientid = <client-id&

E-DOC-CTC-20061027-0004 v1.0Contentsxiv29 NAT Commands... 561nat config ...

E-DOC-CTC-20061027-0004 v1.0DHCP Commands156EXAMPLE:RELATED COMMANDS:=>dhcp server lease listLease Pool TTL State Clientid0 0.0.0.0 dhcp_pool_1 00:

E-DOC-CTC-20061027-0004 v1.0DHCP Commands157dhcp server lease deleteDelete a DHCP server lease.SYNTAX:where:EXAMPLE:RELATED COMMANDS:dhcp server lease

E-DOC-CTC-20061027-0004 v1.0DHCP Commands158dhcp server lease flushFlush all the DHCP server leases.SYNTAX:where:EXAMPLE:iThe flush command does not i

E-DOC-CTC-20061027-0004 v1.0DHCP Commands159dhcp server lease listList all the DHCP server leases.SYNTAX:where:EXAMPLE:RELATED COMMANDS:dhcp server le

E-DOC-CTC-20061027-0004 v1.0DHCP Commands160dhcp server option flushFlush all DHCP server option templates and instances.SYNTAX:iThe flush command doe

E-DOC-CTC-20061027-0004 v1.0DHCP Commands161dhcp server option instaddAdd a DHCP server option instance.SYNTAX:where:dhcp server option instadd name =

E-DOC-CTC-20061027-0004 v1.0DHCP Commands162EXAMPLE:RELATED COMMANDS:=>dhcp server option instlistmyInstanceTmpl name : myTmpl (1)Use : 0Value : (3

E-DOC-CTC-20061027-0004 v1.0DHCP Commands163dhcp server option instdeleteDelete a DHCP server option instance.SYNTAX:where:EXAMPLE:RELATED COMMANDS:dh

E-DOC-CTC-20061027-0004 v1.0DHCP Commands164dhcp server option instlistList all the DHCP server option instances.SYNTAX:EXAMPLE:RELATED COMMANDS:dhcp

E-DOC-CTC-20061027-0004 v1.0DHCP Commands165dhcp server option tmpladdAdd a DHCP server option template.SYNTAX:where:EXAMPLE:RELATED COMMANDS:dhcp ser

E-DOC-CTC-20061027-0004 v1.0Contentsxv32 Script Commands ...615script add...

E-DOC-CTC-20061027-0004 v1.0DHCP Commands166dhcp server option tmpldeleteDelete a DHCP server option template.SYNTAX:where:EXAMPLE:RELATED COMMANDS:dh

E-DOC-CTC-20061027-0004 v1.0DHCP Commands167dhcp server option tmpllistList all the DHCP server option templates.SYNTAX:EXAMPLE:RELATED COMMANDS:dhcp

E-DOC-CTC-20061027-0004 v1.0DHCP Commands168dhcp server pool addAdd a DHCP server pool.SYNTAX:where:dhcp server pool add name = <string>[index =

E-DOC-CTC-20061027-0004 v1.0DHCP Commands169EXAMPLE:RELATED COMMANDS:=>dhcp server pool listPool Start End State PPP0 dhcp_pool_1 0.0.0.0 0.0.0.0 F

E-DOC-CTC-20061027-0004 v1.0DHCP Commands170dhcp server pool configConfigure a DHCP server pool. SYNTAX:where:dhcp server pool config name = <strin

E-DOC-CTC-20061027-0004 v1.0DHCP Commands171EXAMPLE:gateway The IP address of the default gateway for the DHCP clients.The default value of this param

E-DOC-CTC-20061027-0004 v1.0DHCP Commands172dhcp server pool deleteDelete a DHCP server pool.SYNTAX:where:EXAMPLE:RELATED COMMANDS:dhcp server pool de

E-DOC-CTC-20061027-0004 v1.0DHCP Commands173dhcp server pool flushFlush all DHCP server pools.SYNTAX:EXAMPLE:iThe flush command does not impact previo

E-DOC-CTC-20061027-0004 v1.0DHCP Commands174dhcp server pool listList all DHCP server pools.SYNTAX:where:EXAMPLE:RELATED COMMANDS:dhcp server pool lis

E-DOC-CTC-20061027-0004 v1.0DHCP Commands175dhcp server pool optaddAdd an option instance to the DHCP server pool.SYNTAX:where:EXAMPLE:RELATED COMMAND

E-DOC-CTC-20061027-0004 v1.0Contentsxvisnmp ifdelete ...

E-DOC-CTC-20061027-0004 v1.0DHCP Commands176dhcp server pool optdeleteDelete an option instance from the DHCP server pool.SYNTAX:where:dhcp server poo

E-DOC-CTC-20061027-0004 v1.0DHCP Commands177EXAMPLE:RELATED COMMANDS:=>dhcp server pool list name=dhcp_pool_1Pool Start End Intf State1 dhcp_pool_1

E-DOC-CTC-20061027-0004 v1.0DHCP Commands178dhcp server pool rtaddAdd a route to the DHCP server pool.SYNTAX:where:RELATED COMMANDS:dhcp server pool r

E-DOC-CTC-20061027-0004 v1.0DHCP Commands179dhcp server pool rtdeleteDelete a route from the DHCP server pool.SYNTAX:where:RELATED COMMANDS:dhcp serve

E-DOC-CTC-20061027-0004 v1.0DHCP Commands180dhcp server pool ruleaddAdd a selection rule to the DHCP server pool.SYNTAX:where:RELATED COMMANDS:dhcp se

E-DOC-CTC-20061027-0004 v1.0DHCP Commands181dhcp server pool ruledeleteDelete a selection rule from the DHCP server pool.SYNTAX:where:RELATED COMMANDS

E-DOC-CTC-20061027-0004 v1.0DHCP Commands182

E-DOC-CTC-20061027-0004 v1.0DNS Commands18310 DNS CommandsIntroductionThis chapter describes the commands of the dns command group.ContentsThis chapte

E-DOC-CTC-20061027-0004 v1.0DNS Commands184dns client configModify the Domain Name System (DNS) resolver configuration.SYNTAX:where:EXAMPLE:dns client

E-DOC-CTC-20061027-0004 v1.0DNS Commands185dns client dnsaddAdd a DNS server.SYNTAX:where:EXAMPLE:RELATED COMMANDS:dns client dnsadd addr = <string

E-DOC-CTC-20061027-0004 v1.0Contentsxviisystemlog DBG dbg_contents ...

E-DOC-CTC-20061027-0004 v1.0DNS Commands186dns client dnsdeleteDelete a DNS server.SYNTAX:where:EXAMPLE:RELATED COMMANDS:dns client dnsdelete index =

E-DOC-CTC-20061027-0004 v1.0DNS Commands187dns client dnslistList all DNS servers.SYNTAX:EXAMPLE:RELATED COMMANDS:dns client dnslist=>dns client dn

E-DOC-CTC-20061027-0004 v1.0DNS Commands188dns client flushRemove all DNS servers.SYNTAX:dns client flush

E-DOC-CTC-20061027-0004 v1.0DNS Commands189dns client nslookupDNS lookup for a domain name or an address.SYNTAX:where:dns client nslookup host = <s

E-DOC-CTC-20061027-0004 v1.0DNS Commands190dns server configModify the DNS resolver configuration.SYNTAX:where:EXAMPLE:dns server config [domain = <

E-DOC-CTC-20061027-0004 v1.0DNS Commands191dns server flushFlush all local DNS hosts and routes.SYNTAX:dns server flush

E-DOC-CTC-20061027-0004 v1.0DNS Commands192dns server debug clearClear the DNS server/forwarder statistics.SYNTAX:EXAMPLE:RELATED COMMANDS:dns server

E-DOC-CTC-20061027-0004 v1.0DNS Commands193dns server debug statsPrint the DNS server/forwarder statistics.SYNTAX:EXAMPLE:RELATED COMMANDS:dns server

E-DOC-CTC-20061027-0004 v1.0DNS Commands194dns server debug spoof clearClear the intercept cache tableSYNTAX:RELATED COMMANDS:dns server debug spoof c

E-DOC-CTC-20061027-0004 v1.0DNS Commands195dns server debug spoof getaddressGet the real ip for the given spoofed ipSYNTAX:where:EXAMPLE:RELATED COMMA

E-DOC-CTC-20061027-0004 v1.0Contentsxviiiwireless reset ...

E-DOC-CTC-20061027-0004 v1.0DNS Commands196dns server debug spoof getflagsGet the error flags for the given spoofed ipSYNTAX:where:EXAMPLE:RELATED COM

E-DOC-CTC-20061027-0004 v1.0DNS Commands197dns server debug spoof listList the intercept cache table.SYNTAX:EXAMPLE:RELATED COMMANDS:dsn server debug

E-DOC-CTC-20061027-0004 v1.0DNS Commands198dns server debug spoof updateUpdate the intercept cache table.SYNTAX:EXAMPLE:RELATED COMMANDS:dns server de

E-DOC-CTC-20061027-0004 v1.0DNS Commands199dns server host addAdd a local DNS host.SYNTAX:where:EXAMPLE:RELATED COMMANDS:dns server host add name = &l

E-DOC-CTC-20061027-0004 v1.0DNS Commands200dns server host deleteDelete a local DNS host.SYNTAX:where:EXAMPLE:RELATED COMMANDS:dns server host delete

E-DOC-CTC-20061027-0004 v1.0DNS Commands201dns server host flushFlush all the local DNS hosts.SYNTAX:EXAMPLE:dns server host flush=>dns server host

E-DOC-CTC-20061027-0004 v1.0DNS Commands202dns server host listList all the local DNS hosts.SYNTAX:EXAMPLE:RELATED COMMANDS:dns server host list=>d

E-DOC-CTC-20061027-0004 v1.0DNS Commands203dns server route addCreates a DNS forwarding entry or template.SYNTAX:where:dns server route add dns = <

E-DOC-CTC-20061027-0004 v1.0DNS Commands204EXAMPLE:RELATED COMMANDS:=>dns server route add dns=150.150.150.150 src=10.0.0.0/8 domain=myDNS intf=eth

E-DOC-CTC-20061027-0004 v1.0DNS Commands205dns server route deleteDeletes a DNS forwarding entry or templateSYNTAX:where:EXAMPLE:RELATED COMMANDS:dns

E-DOC-CTC-20061027-0004 v1.0Contentsxix45 System Logging Messages... 775Auto-PVC Module ...

E-DOC-CTC-20061027-0004 v1.0DNS Commands206dns server route flushRemoves all DNS forwarding entries and templates.SYNTAX:EXAMPLE:dns server route flus

E-DOC-CTC-20061027-0004 v1.0DNS Commands207dns server route listList all the DNS forwarding entries or templates.SYNTAX:EXAMPLE:RELATED COMMANDS:dns s

E-DOC-CTC-20061027-0004 v1.0DNS Commands208

E-DOC-CTC-20061027-0004 v1.0DSD Commands20911 DSD CommandsIntroductionThis chapter describes the commands of the dsd command group.ContentsThis chapte

E-DOC-CTC-20061027-0004 v1.0DSD Commands210dsd configDisplay/modify the Differentiated Service Delivery (DSD) framework configuration.SYNTAX:where:EXA

E-DOC-CTC-20061027-0004 v1.0DSD Commands211dsd debug configDisplay/modify DSD debug settingsSYNTAX:where:config [turbomode = <{disabled|enabled}>

E-DOC-CTC-20061027-0004 v1.0DSD Commands212dsd debug connection listDisplay the internal connection pool usage.SYNTAX:where:dsd debug connection list

E-DOC-CTC-20061027-0004 v1.0DSD Commands213dsd debug proxyDisplay/modify the HyperText Transfer Protocol (HTTP) Intercept fixed proxy configuration.SY

E-DOC-CTC-20061027-0004 v1.0DSD Commands214dsd debug recyclingDisplay/modify HTTPI recycling settingsSYNTAX:where:dsd debug recycling state = <disa

E-DOC-CTC-20061027-0004 v1.0DSD Commands215dsd debug statsDisplay/clear DSD framework and module statisticsSYNTAX:where:dsd debug stats name = <{in

E-DOC-CTC-20061027-0004 v1.0Contentsxx

E-DOC-CTC-20061027-0004 v1.0DSD Commands216dsd intercept configDisplay/modify the HTTP Intercept configuration.SYNTAX:where:EXAMPLE:dsd intercept conf

E-DOC-CTC-20061027-0004 v1.0DSD Commands217dsd syslog configDisplay/modify the HTTP Intercept logging configuration.SYNTAX:where:EXAMPLE:RELATED COMMA

E-DOC-CTC-20061027-0004 v1.0DSD Commands218dsd syslog listDisplay the HTTP Intercept log file.SYNTAX:EXAMPLE:RELATED COMMANDS:dsd syslog list=>dsd

E-DOC-CTC-20061027-0004 v1.0DSD Commands219dsd urlfilter configDisplay/modify the URL filtering configuration.SYNTAX:where:EXAMPLE:dsd urlfilter confi

E-DOC-CTC-20061027-0004 v1.0DSD Commands220dsd urlfilter rule addAdd a rule.SYNTAX:where:EXAMPLE:RELATED COMMANDS:dsd urlfilter rule add url = <str

E-DOC-CTC-20061027-0004 v1.0DSD Commands221dsd urlfilter rule deleteDelete a rule.SYNTAX:where:EXAMPLE:RELATED COMMANDS:dsd urlfilter rule delete inde

E-DOC-CTC-20061027-0004 v1.0DSD Commands222dsd urlfilter rule flushRemove all current rules.SYNTAX:EXAMPLE:dsd urlfilter rule flush=>dsd urlfilter

E-DOC-CTC-20061027-0004 v1.0DSD Commands223dsd urlfilter rule listDisplay the list of current rules.SYNTAX:EXAMPLE:RELATED COMMANDS:dsd urlfilter rule

E-DOC-CTC-20061027-0004 v1.0DSD Commands224dsd urlfilter rule modifyModify an existing rule.SYNTAX:where:dsd urlfilter rule modify index = <number&

E-DOC-CTC-20061027-0004 v1.0DSD Commands225EXAMPLE:RELATED COMMANDS:=>dsd urlfilter rule listIndex Action Url Redirect----- ------ --- --------0 re

E-DOC-CTC-20061027-0004 v1.0About this CLI Reference Guide1About this CLI Reference GuideUsed SymbolsTerminologyGenerally, the Thomson ST585v6 (HP)

E-DOC-CTC-20061027-0004 v1.0DSD Commands226

E-DOC-CTC-20061027-0004 v1.0DynDNS Commands22712 DynDNS CommandsIntroductionDynamic DNS is a service that allows to bind a host name to an IP address.

E-DOC-CTC-20061027-0004 v1.0DynDNS Commands228dyndns addAdd a dynamic DNS client.SYNTAX:where:EXAMPLE:RELATED COMMANDS:dyndns add name = <string>

E-DOC-CTC-20061027-0004 v1.0DynDNS Commands229dyndns deleteDelete a dynamic DNS client.SYNTAX:where:EXAMPLE:RELATED COMMANDS:dyndns delete name = <

E-DOC-CTC-20061027-0004 v1.0DynDNS Commands230dyndns flushDelete all the dynamic DNS clients.SYNTAX:dyndns flush

E-DOC-CTC-20061027-0004 v1.0DynDNS Commands231dyndns listList all the dynamic DNS clients.SYNTAX:EXAMPLE:RELATED COMMANDS:dyndns list=>dyndns listW

E-DOC-CTC-20061027-0004 v1.0DynDNS Commands232dyndns modifyModify a dynamic DNS client.SYNTAX:where:dyndns modify name = <string> [intf = <st

E-DOC-CTC-20061027-0004 v1.0DynDNS Commands233EXAMPLE:status Enable or disable the dynamic DNS client.The default is disabled.OPTIONALtrace Enable or

E-DOC-CTC-20061027-0004 v1.0DynDNS Commands234dyndns host addAdd a fully qualified host name.SYNTAX:where:EXAMPLE:RELATED COMMANDS:dyndns host add gro

E-DOC-CTC-20061027-0004 v1.0DynDNS Commands235dyndns host deleteDelete a host name.SYNTAX:where:EXAMPLE:RELATED COMMANDS:dyndns host delete name = <

E-DOC-CTC-20061027-0004 v1.0About this CLI Reference Guide2

E-DOC-CTC-20061027-0004 v1.0DynDNS Commands236dyndns host flushDelete all hosts.SYNTAX:iThe hosts cannot be flushed, if there is still a group referen

E-DOC-CTC-20061027-0004 v1.0DynDNS Commands237dyndns host listList all host names.SYNTAX:EXAMPLE:RELATED COMMANDS:dyndns host list=>dyndns host lis

E-DOC-CTC-20061027-0004 v1.0DynDNS Commands238dyndns service listList all dynamic DNS services.SYNTAX:EXAMPLE:dyndns service list=>dyndns service l

E-DOC-CTC-20061027-0004 v1.0DynDNS Commands239RELATED COMMANDS:dyndns service modify Modify specific dynamic DNS service settings.

E-DOC-CTC-20061027-0004 v1.0DynDNS Commands240dyndns service modifyModify specific dynamic DNS service settings.SYNTAX:where:dyndns service modify nam

E-DOC-CTC-20061027-0004 v1.0DynDNS Commands241EXAMPLE:RELATED COMMANDS:=>dyndns service modify name=custom server=mydyndns.org port=www-http reques

E-DOC-CTC-20061027-0004 v1.0DynDNS Commands242

E-DOC-CTC-20061027-0004 v1.0Env Commands24313 Env CommandsIntroductionThis chapter describes the commands of the env command group.ContentsThis chapte

Env CommandsE-DOC-CTC-20061027-0004 v1.0244env flushFlush all the non-system environment variables.SYNTAX:env flush

Env CommandsE-DOC-CTC-20061027-0004 v1.0245EXAMPLE :=>env list_SNTPPOLL_POST_SYNC=60_SNTPPOLL_PRE_SYNC=60_COMPANY_NAME=THOMSON_COMPANY_URL=http://w

E-DOC-CTC-20061027-0004 v1.0Root Commands31 Root CommandsFrom the root prompt, you can choose one of the following commands:EXAMPLE:Command Descriptio

E-DOC-CTC-20061027-0004 v1.0Env Commands246env getGet the current value of an environment variable.SYNTAX:where:EXAMPLE:RELATED COMMANDS:env get var =

E-DOC-CTC-20061027-0004 v1.0Env Commands247env listShow all the currently available environment variables.

E-DOC-CTC-20061027-0004 v1.0Env Commands248SYNTAX:EXAMPLE:RELATED COMMANDS:env list=>env list_SNTPPOLL_POST_SYNC=60_SNTPPOLL_PRE_SYNC=60_COMPANY_NA

E-DOC-CTC-20061027-0004 v1.0Env Commands249env setSet an environment variable.SYNTAX:where:EXAMPLE:For infinite TELNET time out, set the value of the

E-DOC-CTC-20061027-0004 v1.0Env Commands250env unsetDelete a environment variable.SYNTAX:where:EXAMPLE:RELATED COMMANDS:env unset var = <string>

E-DOC-CTC-20061027-0004 v1.0Eth Commands25114 Eth CommandsIntroductionThis chapter describes the commands of the eth command group.ContentsThis chapte

E-DOC-CTC-20061027-0004 v1.0Eth Commands252eth bridge igmpsnooping iflist Display a bridge interface‘s IGMP status 284eth bridge igmpsnooping clear Cl

E-DOC-CTC-20061027-0004 v1.0Eth Commands253eth ifaddCreate a new ETH interface.SYNTAX:where:EXAMPLE:RELATED COMMANDS:eth ifadd intf = <string>in

E-DOC-CTC-20061027-0004 v1.0Eth Commands254eth ifattachAttach an ETH interface.SYNTAX:where:EXAMPLE:RELATED COMMANDS:eth ifattach intf = <string>

E-DOC-CTC-20061027-0004 v1.0Eth Commands255eth ifconfigModify an ETH interface.SYNTAX:where:EXAMPLE:eth ifconfig intf = <string>[dest = <stri

E-DOC-CTC-20061027-0004 v1.0Root Commands4pingSend ICMP ECHO_REQUEST packets.SYNTAX:where:EXAMPLE:ping proto = <{ip|atm}>addr = <ip-address&g

E-DOC-CTC-20061027-0004 v1.0Eth Commands256eth ifdeleteDelete an ETH interface.SYNTAX:where:EXAMPLE:RELATED COMMANDS:eth ifdelete intf = <string>

E-DOC-CTC-20061027-0004 v1.0Eth Commands257eth ifdetachDetach an ETH interface.SYNTAX:where:EXAMPLE:RELATED COMMANDS:eth ifdetach intf = <string>

E-DOC-CTC-20061027-0004 v1.0Eth Commands258eth iflistDisplay the ETH interfaces.SYNTAX:where:EXAMPLE:RELATED COMMANDS:eth iflist [intf = <string>

E-DOC-CTC-20061027-0004 v1.0Eth Commands259eth flushFlush all the ETH interfaces.SYNTAX:iThe flush command does not impact previously saved configurat

E-DOC-CTC-20061027-0004 v1.0Eth Commands260eth bridge clearClear the bridge statistics.SYNTAX:EXAMPLE:eth bridge clear=>eth bridge iflistOBC : dest

E-DOC-CTC-20061027-0004 v1.0Eth Commands261eth bridge list Display the current bridge instancesSyntaxwhereeth bridge list [brname = <{bridge}>]b

E-DOC-CTC-20061027-0004 v1.0Eth Commands262eth bridge add Add a new bridge instanceSyntaxwhereeth bridge add brname=<string>brname The name of

E-DOC-CTC-20061027-0004 v1.0Eth Commands263eth bridge delete Delete a bridge instanceSyntaxwhereeth bridge delete brname = <{bridge}>brname The

E-DOC-CTC-20061027-0004 v1.0Eth Commands264eth bridge select Select the default bridge to configure interfaces (when not setting a bridge name, for l

E-DOC-CTC-20061027-0004 v1.0Eth Commands265eth bridge configModify/display the bridge configuration settings.SYNTAX:where:EXAMPLE:eth bridge config [b

E-DOC-CTC-20061027-0004 v1.0Root Commands5tracerouteSend ICMP/UDP packets to trace the IP path.SYNTAX:where:traceroute addr = <ip-address>[count

E-DOC-CTC-20061027-0004 v1.0Eth Commands266eth bridge dynvlan actlistDisplay the active MAC entries for the dynamic VLAN membership.SYNTAX:RELATED COM

E-DOC-CTC-20061027-0004 v1.0Eth Commands267eth bridge dynvlan addAdd a dynamic VLAN membership entry.SYNTAX:where:RELATED COMMANDS:eth bridge dynvlan

E-DOC-CTC-20061027-0004 v1.0Eth Commands268eth bridge dynvlan configModify the dynamic VLAN membership configuration.SYNTAX:where:RELATED COMMANDS:eth

E-DOC-CTC-20061027-0004 v1.0Eth Commands269eth bridge dynvlan deleteDelete a dynamic VLAN membership entry.SYNTAX:where:RELATED COMMANDS:eth bridge dy

E-DOC-CTC-20061027-0004 v1.0Eth Commands270eth bridge dynvlan flushFlush all dynamic VLAN membership entries.SYNTAX:eth bridge dynvlan flush

E-DOC-CTC-20061027-0004 v1.0Eth Commands271eth bridge dynvlan listDisplay a dynamic VLAN membership entry.SYNTAX:RELATED COMMANDS:eth bridge dynvlan l

E-DOC-CTC-20061027-0004 v1.0Eth Commands272eth bridge flushFlush bridge interfaces and parameters.SYNTAX:iThe flush command does not impact previously

E-DOC-CTC-20061027-0004 v1.0Eth Commands273eth bridge ifaddAdd a new bridge interface.SYNTAX:where:RELATED COMMANDS:eth bridge ifadd [brname = <{br

E-DOC-CTC-20061027-0004 v1.0Eth Commands274eth bridge ifattachAttach a bridge interface.SYNTAX:where:RELATED COMMANDS:eth bridge ifattach [brname = &l

E-DOC-CTC-20061027-0004 v1.0Eth Commands275eth bridge ifconfigModify a bridge interface configuration.SYNTAX:where:eth bridge ifconfig [brname = <{

Thomson ST585v6 (HP) CLI Reference GuideR6.2

E-DOC-CTC-20061027-0004 v1.0Root Commands6EXAMPLE:=>traceroute addr = 192.193.195.250 count=3 size=1 interval=1000 maxhops=30 dstport=33433maxfail=

E-DOC-CTC-20061027-0004 v1.0Eth Commands276ipprec The IP precedence for this interface.Choose between:> disabled> precedence> dscp.The defaul

E-DOC-CTC-20061027-0004 v1.0Eth Commands277eth bridge ifdeleteDelete a bridge interface.SYNTAX:where:RELATED COMMANDS:eth bridge ifdelete [brname = &l

E-DOC-CTC-20061027-0004 v1.0Eth Commands278eth bridge ifdetachDetach a bridge interface.SYNTAX:where:RELATED COMMANDS:eth bridge ifdetach [brname = &l

E-DOC-CTC-20061027-0004 v1.0Eth Commands279eth bridge iflistDisplay the current bridge interfaces.SYNTAX:where:RELATED COMMANDS:eth bridge iflist [brn

E-DOC-CTC-20061027-0004 v1.0Eth Commands280eth bridge ifflushFlush the bridge interfaces: detach/delete all interfaces.SYNTAX:where:eth bridge ifflush

E-DOC-CTC-20061027-0004 v1.0Eth Commands281eth bridge igmpsnooping configConfigure the bridge instance‘s IGMP Snooping flagsSyntaxwhere: eth bridge ig

E-DOC-CTC-20061027-0004 v1.0Eth Commands282eth bridge igmpsnooping listDisplay a bridge instance‘s snooped groups.Syntaxwhere: eth bridge igmpsnoopin

E-DOC-CTC-20061027-0004 v1.0Eth Commands283eth bridge igmpsnooping ifconfigConfigure the bridge interface‘s IGMP snooping flags and mode.Syntaxwhere:

E-DOC-CTC-20061027-0004 v1.0Eth Commands284eth bridge igmpsnooping iflistDisplay a bridge interface‘s IGMP statusSyntaxwhere: Display bridge interface

E-DOC-CTC-20061027-0004 v1.0Eth Commands285eth bridge igmpsnooping clearClear the snooping statistics.Syntaxwhere: eth bridge igmpsnooping clear [brna

E-DOC-CTC-20061027-0004 v1.0ADSL Commands72 ADSL CommandsIntroductionThis chapter describes the commands of the adsl command group.ContentsThis chapte

E-DOC-CTC-20061027-0004 v1.0Eth Commands286eth bridge macaddAdd a static MAC address to a bridge interface.This command allows to manually add static

E-DOC-CTC-20061027-0004 v1.0Eth Commands287EXAMPLE:RELATED COMMANDS:=>eth bridge maclist00:10:a4:ad:32:cf -- dynamic, ethport1, 300 seconds00:90:d0

E-DOC-CTC-20061027-0004 v1.0Eth Commands288eth bridge macdeleteRemove a MAC address from the filtering database.SYNTAX:where:EXAMPLE:eth bridge macdel

E-DOC-CTC-20061027-0004 v1.0Eth Commands289RELATED COMMANDS:eth bridge macadd Add a static MAC address to a bridge interface.eth bridge maclist Displa

E-DOC-CTC-20061027-0004 v1.0Eth Commands290eth bridge maclistDisplay the MAC address database.SYNTAX:where:EXAMPLE:RELATED COMMANDS:eth bridge maclist

E-DOC-CTC-20061027-0004 v1.0Eth Commands291eth bridge mcdaddAdd a multicast group to be dropped to the database.SYNTAX:where:RELATED COMMANDS:eth brid

E-DOC-CTC-20061027-0004 v1.0Eth Commands292eth bridge mcddeleteDelete a multicast group to be dropped from the database.SYNTAX:where:RELATED COMMANDS:

E-DOC-CTC-20061027-0004 v1.0Eth Commands293eth bridge mcdlistDisplay the multicast group to be dropped from the database.SYNTAX:RELATED COMMANDS:eth b

E-DOC-CTC-20061027-0004 v1.0Eth Commands294eth bridge rule addAdd a new constraint to the VLAN learning system.SYNTAX:where:EXAMPLE:RELATED COMMANDS:e

E-DOC-CTC-20061027-0004 v1.0Eth Commands295eth bridge rule deleteDelete a constraint from the VLAN learning system.SYNTAX:where:EXAMPLE:RELATED COMMAN

E-DOC-CTC-20061027-0004 v1.0ADSL Commands8adsl configShow/set the Asymmetric Digital Subscriber Line (ADSL) configuration.SYNTAX:where:EXAMPLE:The exa

E-DOC-CTC-20061027-0004 v1.0Eth Commands296eth bridge rule flushFlush all constraints from the VLAN learning system.SYNTAX:eth bridge rule flush

E-DOC-CTC-20061027-0004 v1.0Eth Commands297eth bridge rule listDisplay all constraints from the VLAN learning system.SYNTAX:EXAMPLE:RELATED COMMANDS:e

E-DOC-CTC-20061027-0004 v1.0Eth Commands298eth bridge vlan ifaddAdd a bridge interface to a VLAN.SYNTAX:where:RELATED COMMANDS:eth bridge vlan ifadd n

E-DOC-CTC-20061027-0004 v1.0Eth Commands299eth bridge vlan ifconfigModify a bridge interface from a VLAN.SYNTAX:where:RELATED COMMANDS:eth bridge vlan

E-DOC-CTC-20061027-0004 v1.0Eth Commands300eth bridge vlan ifdeleteDelete a bridge interface from a VLAN.SYNTAX:where:RELATED COMMANDS:eth bridge vlan

E-DOC-CTC-20061027-0004 v1.0Eth Commands301eth bridge vlan iflistDisplay all VLANs.SYNTAX:RELATED COMMANDS:eth bridge vlan iflisteth bridge vlan ifadd

E-DOC-CTC-20061027-0004 v1.0Eth Commands302eth device ifconfigConfigure an Ethernet interface.SYNTAX:where:eth device ifconfig intf = <string>[t

E-DOC-CTC-20061027-0004 v1.0Eth Commands303EXAMPLE:RELATED COMMANDS:=>eth device iflistInterface Type Result Stateethif1 auto 100BaseTFD UP [forwar

E-DOC-CTC-20061027-0004 v1.0Eth Commands304eth device iflistShow status of Ethernet interfaces.SYNTAX:EXAMPLE:DESCRIPTION:> Type: Indicates the con

E-DOC-CTC-20061027-0004 v1.0Eth Commands305eth switch group flushSet all the ports to the default settings.All the ports are placed in group 0.SYNTAX:

E-DOC-CTC-20061027-0004 v1.0ADSL Commands9adsl infoDisplay the ADSL statistics and information about the DSL line status.Although the same command is

E-DOC-CTC-20061027-0004 v1.0Eth Commands306eth switch group listList all the configured switch groups.SYNTAX:EXAMPLE:RELATED COMMANDS:eth switch group

E-DOC-CTC-20061027-0004 v1.0Eth Commands307eth switch group moveMove a specified port to a specified switch group.SYNTAX:where:EXAMPLE:RELATED COMMAND

E-DOC-CTC-20061027-0004 v1.0Eth Commands308eth switch mirror captureDefine the specified port to be the Mirror Capture Port.SYNTAX:where:EXAMPLE:RELAT

E-DOC-CTC-20061027-0004 v1.0Eth Commands309eth switch mirror egressEnable or disable the specified port to be the Mirror Egress Port.SYNTAX:where:EXAM

E-DOC-CTC-20061027-0004 v1.0Eth Commands310eth switch mirror ingressEnable or disable the specified port to be the Mirror Ingress Port.SYNTAX:where:EX

E-DOC-CTC-20061027-0004 v1.0Eth Commands311eth switch share addAdd a port to be shared.SYNTAX:where:RELATED COMMANDS:eth switch share add port = <n

E-DOC-CTC-20061027-0004 v1.0Eth Commands312eth switch share deleteDelete a shared port.SYNTAX:where:RELATED COMMANDS:eth switch share delete port = &l

E-DOC-CTC-20061027-0004 v1.0Eth Commands313eth switch share listDisplay shared ports.SYNTAX:RELATED COMMANDS:eth switch share listeth switch share add

E-DOC-CTC-20061027-0004 v1.0Eth Commands314eth vlan addAdd a new VLAN.SYNTAX:where:EXAMPLE:RELATED COMMANDS:eth vlan add name = <string>vid = &l

E-DOC-CTC-20061027-0004 v1.0Eth Commands315eth vlan deleteDelete a VLAN.SYNTAX:where:EXAMPLE:RELATED COMMANDS:eth vlan delete name = <string>nam

E-DOC-CTC-20061027-0004 v1.0ADSL Commands10EXAMPLE (for a Thomson ST ADSL/POTS variant):=>adsl infoModemstate : upOperation Mode : G.992.1 Annex AC

E-DOC-CTC-20061027-0004 v1.0Eth Commands316eth vlan flushFlush all VLANs.SYNTAX:EXAMPLE:iAll the VLANs, except the default VLAN will be flushed.eth vl

E-DOC-CTC-20061027-0004 v1.0Eth Commands317eth vlan listDisplay all VLANs.SYNTAX:EXAMPLE:RELATED COMMANDS:eth vlan list=>eth vlan listVid Name--- -

E-DOC-CTC-20061027-0004 v1.0Eth Commands318

E-DOC-CTC-20061027-0004 v1.0Expr Commands31915 Expr CommandsIntroductionThis chapter describes the commands of the expr command group.ContentsThis cha

E-DOC-CTC-20061027-0004 v1.0Expr Commands320expr addAdd a subexpression to an expression.SYNTAX:where:expr add name = <string>type = <{intf |

E-DOC-CTC-20061027-0004 v1.0Expr Commands321intfgroup The IP interface group.Choose between:> wan> local> lan> tunnel> dmz> guest.No

E-DOC-CTC-20061027-0004 v1.0Expr Commands322icmpcode A number between 0 and 15.Represents the ICMP code (or beginning of range) of the packet.OPTIONAL

E-DOC-CTC-20061027-0004 v1.0Expr Commands323EXAMPLE:RELATED COMMANDS:=>expr listname type use flags expression-------------------------------------

E-DOC-CTC-20061027-0004 v1.0Expr Commands324expr deleteDelete an expression.SYNTAX:where:expr delete name = <string>[index = <number>]name

E-DOC-CTC-20061027-0004 v1.0Expr Commands325EXAMPLE:RELATED COMMANDS:=>expr listname type use flags expression-------------------------------------

E-DOC-CTC-20061027-0004 v1.0ADSL Commands11adsl debug bitloadinginfoDisplays the number of bits per tone.Syntaxadsl debug bitloadinginfo

E-DOC-CTC-20061027-0004 v1.0Expr Commands326expr flushFlush all the expressions.SYNTAX:expr flush

E-DOC-CTC-20061027-0004 v1.0Expr Commands327expr listList the expressions.SYNTAX:where:expr list [name = <string>][type = <{intf | ip | serv}

E-DOC-CTC-20061027-0004 v1.0Expr Commands328EXAMPLE 1:=>expr listname type use flags expression----------------------------------------------------

E-DOC-CTC-20061027-0004 v1.0Expr Commands329EXAMPLE 2:=>expr list format=cli:expr add name=_Internet type=intf intf=Internet:expr add name=_LocalNe

E-DOC-CTC-20061027-0004 v1.0Expr Commands330RELATED COMMANDS:expr add Add a subexpression to an expression.expr delete Delete an expression.

E-DOC-CTC-20061027-0004 v1.0Expr Commands331expr modifyModify an expression.SYN TAX:where:expr modify name = <string>type = <{intf | ip | ser

E-DOC-CTC-20061027-0004 v1.0Expr Commands332intfgroup The IP interface group.Choose between:> wan> local> lan> tunnel> dmz> guest.No

E-DOC-CTC-20061027-0004 v1.0Expr Commands333icmpcode A number between 0 and 15.Represents the ICMP code (or beginning of range) of the packet.OPTIONAL

E-DOC-CTC-20061027-0004 v1.0Expr Commands334

E-DOC-CTC-20061027-0004 v1.0Firewall Commands33516 Firewall CommandsIntroductionThis chapter describes the commands of the firewall command group.Cont

E-DOC-CTC-20061027-0004 v1.0ADSL Commands12adsl debug deltconfigEnable/disable the Dual Ended Line Testing Interface (DELT)Syntaxwhere: adsl debug del

E-DOC-CTC-20061027-0004 v1.0Firewall Commands336firewall configConfigure the firewall options.SYNTAX:where:firewall config [state = <{disabled | en

E-DOC-CTC-20061027-0004 v1.0Firewall Commands337EXAMPLE:logdefault Disable or enable logging of default firewall rule.The default is disabled.OPTIONAL

E-DOC-CTC-20061027-0004 v1.0Firewall Commands338firewall clearFlush the firewall configuration.SYNTAX:firewall clear

E-DOC-CTC-20061027-0004 v1.0Firewall Commands339firewall listList the firewall configuration.SYNTAX:where:firewall list [format = <{pretty | cli}&g

E-DOC-CTC-20061027-0004 v1.0Firewall Commands340EXAMPLE of output in text mode:EXAMPLE of output in CLI mode:=>firewall listConfig======State : ena

E-DOC-CTC-20061027-0004 v1.0Firewall Commands341firewall chain addAdd a chain.SYNTAX:where:firewall chain add chain = <string>chain The name of

E-DOC-CTC-20061027-0004 v1.0Firewall Commands342EXAMPLE:RELATED COMMANDS:=>firewall chain listChains======Name Description-------------------------

E-DOC-CTC-20061027-0004 v1.0Firewall Commands343firewall chain deleteDelete a chain.SYNTAX:where:firewall chain delete chain = <string>chain The

E-DOC-CTC-20061027-0004 v1.0Firewall Commands344EXAMPLE:RELATED COMMANDS:=>firewall chain listChains======Name Description-------------------------

E-DOC-CTC-20061027-0004 v1.0Firewall Commands345firewall chain flushFlush all chains.SYNTAX:firewall chain flush

E-DOC-CTC-20061027-0004 v1.0ADSL Commands13adsl debug deltinfoDisplay Dual Ended Line Testing Interface (DELT) resultsSyntaxadsl debug deltinfo

E-DOC-CTC-20061027-0004 v1.0Firewall Commands346firewall chain listList all chains.SYNTAX:where:EXAMPLE:RELATED COMMANDS:firewall chain list [format =

E-DOC-CTC-20061027-0004 v1.0Firewall Commands347firewall debug clearClear the firewall statistics.SYNTAX:EXAMPLE:RELATED COMMANDS:firewall debug clear

E-DOC-CTC-20061027-0004 v1.0Firewall Commands348firewall debug statsDisplay the firewall statistics.SYNTAX:EXAMPLE:RELATED COMMANDS:firewall debug sta

E-DOC-CTC-20061027-0004 v1.0Firewall Commands349firewall debug traceconfigConfigure the firewall trace options.SYNTAX:where:EXAMPLE:firewall debug tra

E-DOC-CTC-20061027-0004 v1.0Firewall Commands350firewall level addAdd a security level.SYNTAX:where:firewall level add name = <string>[index = &

E-DOC-CTC-20061027-0004 v1.0Firewall Commands351EXAMPLE:RELATED COMMANDS:=>firewall level listLevel Config============Active level: Disablednr name

E-DOC-CTC-20061027-0004 v1.0Firewall Commands352firewall level deleteDelete a security level.SYNTAX:where:EXAMPLE:firewall level delete name = <str

E-DOC-CTC-20061027-0004 v1.0Firewall Commands353RELATED COMMANDS:firewall level add Add a security level.firewall level list List all the security lev

E-DOC-CTC-20061027-0004 v1.0Firewall Commands354firewall level flushFlush the security level configuration.SYNTAX:firewall level flush

E-DOC-CTC-20061027-0004 v1.0Firewall Commands355firewall level listList all the security levels.SYNTAX:where:firewall level list [format = <{pretty

E-DOC-CTC-20061027-0004 v1.0ADSL Commands14adsl debug modemoptioninfoDisplays the modem options bitmapSyntaxadsl debug modemoptioninfo

E-DOC-CTC-20061027-0004 v1.0Firewall Commands356EXAMPLE:EXAMPLE:RELATED COMMANDS:=>firewall level listLevel Config============Active level: Disable

E-DOC-CTC-20061027-0004 v1.0Firewall Commands357firewall level modifyConfigure a security level.SYNTAX:where:firewall level modify name = <string&g

E-DOC-CTC-20061027-0004 v1.0Firewall Commands358EXAMPLE:=>firewall level listLevel Config============Active level: Disablednr name udptrack service

E-DOC-CTC-20061027-0004 v1.0Firewall Commands359firewall level setSet the security level or display the current security level.SYNTAX:where:EXAMPLE:fi

E-DOC-CTC-20061027-0004 v1.0Firewall Commands360firewall rule addAdd a firewall rule.SYNTAX:where:RELATED COMMANDS:firewall rule add chain = <chain

E-DOC-CTC-20061027-0004 v1.0Firewall Commands361firewall rule deleteDelete a firewall rule.SYNTAX:where:RELATED COMMANDS:firewall rule delete chain =

E-DOC-CTC-20061027-0004 v1.0Firewall Commands362firewall rule flushFlush all firewall rules.SYNTAX:where:firewall rule flush [chain = <string>]c

E-DOC-CTC-20061027-0004 v1.0Firewall Commands363firewall rule listShow a list of the firewall rules in a chain.SYNTAX:where:firewall rule list [chain

E-DOC-CTC-20061027-0004 v1.0Firewall Commands364EXAMPLE:=>firewall rule listRules (flags: C=Constant, D=Dynamic, E=Enable, L=Log)=====Chain Nr. Fla

E-DOC-CTC-20061027-0004 v1.0Firewall Commands365firewall rule modifyModify a firewall rule.SYNTAX:where:RELATED COMMANDS:firewall rule modify chain =

E-DOC-CTC-20061027-0004 v1.0ADSL Commands15adsl debug modemoptionConfigure the modem options bitmapSyntaxwhere: adsl debug modemoption [config = <h

E-DOC-CTC-20061027-0004 v1.0Firewall Commands366firewall rule debug clearClear the firewall rule statistics.SYNTAX:where:firewall rule debug clear [ch

E-DOC-CTC-20061027-0004 v1.0Firewall Commands367EXAMPLE:RELATED COMMANDS:=>firewall rule debug statschain index packets bytes----------------------

E-DOC-CTC-20061027-0004 v1.0Firewall Commands368firewall rule debug statsShow the firewall rule statistics.SYNTAX:where:firewall rule debug stats [cha

E-DOC-CTC-20061027-0004 v1.0Firewall Commands369EXAMPLE:RELATED COMMANDS:=>firewall rule debug statschain index packets bytes----------------------

E-DOC-CTC-20061027-0004 v1.0Firewall Commands370firewall rule debug traceconfigDisplay or modify the rule trace configuration.SYNTAX:where:EXAMPLE:fir

E-DOC-CTC-20061027-0004 v1.0GRP Commands37117 GRP CommandsIntroductionThis chapter describes the commands of the grp command group.ContentsThis chapte

E-DOC-CTC-20061027-0004 v1.0GRP Commands372grp configSet the Generic Routing Protocol (GRP) configuration settings.SYNTAX:where:EXAMPLE:grp config [cd

E-DOC-CTC-20061027-0004 v1.0GRP Commands373grp flushFlush the GRP interface settings and parameters.SYNTAX:grp flush

E-DOC-CTC-20061027-0004 v1.0GRP Commands374grp rtlistShow the current routes in the GRP interfaces routing table.SYNTAX:where:EXAMPLE:grp rtlist [dst

E-DOC-CTC-20061027-0004 v1.0GRP Commands375grp rip configConfigure the RIP settings.SYNTAX:where:grp rip config state = <{disabled | enabled}>[v

CopyrightCopyright ©1999-2007 THOMSON. All rights reserved. Distribution and copying of this document, use and communication of its contents is not pe

E-DOC-CTC-20061027-0004 v1.0ADSL Commands16adsl debug traceconfigConfigure the ADSL tracelevel.Syntaxwhere: adsl debug traceconfig [level = <number

E-DOC-CTC-20061027-0004 v1.0GRP Commands376impsrt Enable or disable the import of static routes.The default is enabled.OPTIONALimpdefkrt Enable or dis

E-DOC-CTC-20061027-0004 v1.0GRP Commands377EXAMPLE:RELATED COMMANDS:=>grp rip showRIP routing protocol config dump---------------------------------

E-DOC-CTC-20061027-0004 v1.0GRP Commands378grp rip flushFlush the RIP interface settings and global parameters.SYNTAX:grp rip flush

E-DOC-CTC-20061027-0004 v1.0GRP Commands379grp rip ifconfigConfigure a RIP interface.SYNTAX:where:grp rip ifconfig intf = <string>[rip = <{di

E-DOC-CTC-20061027-0004 v1.0GRP Commands380EXAMPLE:=>grp rip ifconfigintf = myPPP_ppp[rip] = disabled[rxversion] = rip_unspec[authmode] = none[auth

E-DOC-CTC-20061027-0004 v1.0GRP Commands381grp rip showShow the RIP settings and the routes in the RIP database.SYNTAX:EXAMPLE:grp rip show=>grp ri

E-DOC-CTC-20061027-0004 v1.0GRP Commands382

E-DOC-CTC-20061027-0004 v1.0Hostmgr Commands38318 Hostmgr CommandsIntroductionThis chapter describes the commands of the hostmgr command group.Content

E-DOC-CTC-20061027-0004 v1.0Hostmgr Commands384hostmgr addAdd host device info to the host manager.SYNTAX:where:hostmgr add mac_addr = <hardware-ad

E-DOC-CTC-20061027-0004 v1.0Hostmgr Commands385EXAMPLE:RELATED COMMANDS:=>hostmgr listMAC-address IP-address Flags Type Intf Hw Intf Hostname------

E-DOC-CTC-20061027-0004 v1.0ATM Commands173 ATM CommandsIntroductionThis chapter describes the commands of the atm command group.ContentsThis chapter

E-DOC-CTC-20061027-0004 v1.0Hostmgr Commands386hostmgr clearRemove all the hosts from the list.SYNTAX:EXAMPLE:RELATED COMMANDS:hostmgr clear=>hostm

E-DOC-CTC-20061027-0004 v1.0Hostmgr Commands387hostmgr configConfigure the host manager parameters.SYNTAX:where:EXAMPLE:hostmgr config [state = <{d

E-DOC-CTC-20061027-0004 v1.0Hostmgr Commands388hostmgr deleteDelete the host device info from the host manager.SYNTAX:where:EXAMPLE:RELATED COMMANDS:h

E-DOC-CTC-20061027-0004 v1.0Hostmgr Commands389hostmgr flushFlush the host manager configuration.The host manager configuration is cleaned and returne

E-DOC-CTC-20061027-0004 v1.0Hostmgr Commands390hostmgr listList all the host devices.SYNTAX:EXAMPLE:RELATED COMMANDS:hostmgr list=>hostmgr listMAC-

E-DOC-CTC-20061027-0004 v1.0IDS Commands39119 IDS CommandsIntroductionThis chapter describes the commands of the ids command group.ContentsThis chapte

E-DOC-CTC-20061027-0004 v1.0IDS Commands392ids clearReset the IDS statistics.SYNTAX:RELATED COMMANDS:ids clearids parser list Display the IDS parser c

E-DOC-CTC-20061027-0004 v1.0IDS Commands393ids configDisplay/modify the Intrusion Detection System (IDS) configuration.SYNTAX:where:EXAMPLE:ids config

E-DOC-CTC-20061027-0004 v1.0IDS Commands394ids parser listDisplay the IDS parser configuration.SYNTAX:where:EXAMPLE:ids parser list [parser = <pars

E-DOC-CTC-20061027-0004 v1.0IDS Commands395ids parser modifyModify the IDS parser configuration.SYNTAX:where:ids parser modify parser = <string>

E-DOC-CTC-20061027-0004 v1.0ATM Commands18atm oam vclb add Create a loopback connection for VC. 52atm oam vclb del Delete a loopback connection for VC

E-DOC-CTC-20061027-0004 v1.0IDS Commands396EXAMPLE:=>ids listResources:==========resource total maximum---------------------------------parsers 5 1

E-DOC-CTC-20061027-0004 v1.0IDS Commands397ids pattern clearReset the pattern tracker.SYNTAX:EXAMPLE:RELATED COMMANDS:ids pattern clear=>ids patter

E-DOC-CTC-20061027-0004 v1.0IDS Commands398ids pattern listDisplay the patterns in the pattern tracker.SYNTAX:where:EXAMPLE:RELATED COMMANDS:ids patte

E-DOC-CTC-20061027-0004 v1.0IDS Commands399ids pattern statsDisplay the pattern tracker statistics.SYNTAX:EXAMPLE:RELATED COMMANDS:ids pattern stats=&

E-DOC-CTC-20061027-0004 v1.0IDS Commands400ids signature listDisplays the ids signature configurationSYNTAXwhereEXAMPLE:ids signature list [signature

E-DOC-CTC-20061027-0004 v1.0IDS Commands401ids signature modifyModify the states of the signatures.SYNTAXwhereEXAMPLE:ids signature modify [signature

E-DOC-CTC-20061027-0004 v1.0IDS Commands402ids threshold clearReset the IDS thresholds to their default values.SYNTAX:EXAMPLE:RELATED COMMANDS:ids thr

E-DOC-CTC-20061027-0004 v1.0IDS Commands403ids threshold listDisplay the IDS thresholds.SYNTAX:EXAMPLE:RELATED COMMANDS:ids threshold list=>ids thr

E-DOC-CTC-20061027-0004 v1.0IDS Commands404ids threshold modifyModify the IDS thresholds.SYNTAX:where:EXAMPLE:RELATED COMMANDS:ids threshold modify in

E-DOC-CTC-20061027-0004 v1.0IGMP Commands40520 IGMP CommandsIntroductionThis chapter describes the commands of the IGMP command group.ContentsThis cha

E-DOC-CTC-20061027-0004 v1.0ATM Commands19atm flushFlush all Asynchronous Transfer Mode (ATM) interfaces.SYNTAX:atm flush

E-DOC-CTC-20061027-0004 v1.0IGMP Commands406igmp host configDisplay or modify global IGMP configuration.SYNTAX:where:EXAMPLE:RELATED COMMANDS:igmp hos

E-DOC-CTC-20061027-0004 v1.0IGMP Commands407igmp host flushFlush the IGMP settings.SYNTAX:igmp host flush

E-DOC-CTC-20061027-0004 v1.0IGMP Commands408igmp host listShow the IGMP groups.SYNTAX:where:EXAMPLE:igmp host list [intf = <string>][expand = &l

E-DOC-CTC-20061027-0004 v1.0IGMP Commands409igmp host ifconfigConfigure an IGMP interface.SYNTAX:where:EXAMPLE:RELATED COMMANDS:igmp host ifconfig int

E-DOC-CTC-20061027-0004 v1.0IGMP Commands410igmp host iflistShow the configuration of the IGMP interfaces.SYNTAX:where:EXAMPLE:RELATED COMMANDS:igmp h

E-DOC-CTC-20061027-0004 v1.0IGMP Commands411igmp host debug clearClear IGMP statistics.SYNTAX:RELATED COMMANDS:igmp host debug clearigmp host debug st

E-DOC-CTC-20061027-0004 v1.0IGMP Commands412igmp host debug statsPrint IGMP statistics.SYNTAX:EXAMPLE:RELATED COMMANDS:igmp host debug stats=>igmp

E-DOC-CTC-20061027-0004 v1.0IGMP Commands413igmp proxy configConfigure the IGMP proxy.SYNTAX:where:igmp proxy config [state = <{disabled | enabled}

E-DOC-CTC-20061027-0004 v1.0IGMP Commands414EXAMPLE:RELATED COMMANDS:=>igmp proxy configIGMP proxy state : disabledQuery Interval : 0 days, 0:02:05

E-DOC-CTC-20061027-0004 v1.0IGMP Commands415igmp proxy flushFlush all IGMP proxy settings and learned groups.SYNTAX:igmp proxy flush

E-DOC-CTC-20061027-0004 v1.0ATM Commands20atm ifaddCreate a new ATM interface. SYNTAX:where:EXAMPLE:RELATED COMMANDS:atm ifadd intf = <string>in

E-DOC-CTC-20061027-0004 v1.0IGMP Commands416igmp proxy grouplistShow the learned groups on an IGMP proxy interface.SYNTAX:where:RELATED COMMANDS:igmp

E-DOC-CTC-20061027-0004 v1.0IGMP Commands417igmp proxy ifconfigConfigure an IGMP proxy interface.SYNTAX:where:EXAMPLE:RELATED COMMANDS:igmp proxy ifco

E-DOC-CTC-20061027-0004 v1.0IGMP Commands418igmp proxy iflistShow the configuration of an IGMP proxy interface.SYNTAX:where:EXAMPLE:RELATED COMMANDS:i

E-DOC-CTC-20061027-0004 v1.0IGMP Commands419igmp proxy mbslistShow the IGMP proxy membership database (merge of all learned groups.SYNTAX:igmp proxy m

E-DOC-CTC-20061027-0004 v1.0IGMP Commands420igmp proxy debug clearClear IGMP proxy statistics.SYNTAX:RELATED COMMANDS:igmp proxy debug clearigmp proxy

E-DOC-CTC-20061027-0004 v1.0IGMP Commands421igmp proxy debug statsPrint IGMP proxy statistics.SYNTAX:EXAMPLE:RELATED COMMANDS:igmp proxy debug stats=&

E-DOC-CTC-20061027-0004 v1.0IGMP Commands422igmp proxy debug traceconfigModify IGMP proxy trace configuration.SYNTAX:where:RELATED COMMANDS:igmp proxy

E-DOC-CTC-20061027-0004 v1.0Interface Commands42321 Interface CommandsIntroductionThis chapter describes the commands of the interface command group.C

E-DOC-CTC-20061027-0004 v1.0Interface Commands424interface listDisplay interfaces.SYNTAX:where:interface list [expand = <{disabled | enabled}>][

E-DOC-CTC-20061027-0004 v1.0Interface Commands425EXAMPLE:=>interface listName Type State Use UL Interfacesethif1 physical connected 1 bridgeethif4

E-DOC-CTC-20061027-0004 v1.0ATM Commands21atm ifattachAttach a ATM interface.SYNTAX:where:EXAMPLE:RELATED COMMANDS:atm ifattach intf = <string>i

E-DOC-CTC-20061027-0004 v1.0Interface Commands426

E-DOC-CTC-20061027-0004 v1.0IP Commands42722 IP CommandsIntroductionThis chapter describes the commands of the ip command group.ContentsThis chapter c

E-DOC-CTC-20061027-0004 v1.0IP Commands428ip debug sendto Send UDP packets. 464ip debug stats Display IP statistics. 466ip debug traceconfig Display/m

E-DOC-CTC-20061027-0004 v1.0IP Commands429ip arpaddAdd an entry to the ARP cache of a broadcast Internet Protocol (IP) interface.SYNTAX:where:EXAMPLE:

E-DOC-CTC-20061027-0004 v1.0IP Commands430ip arpdeleteDelete an entry from the ARP cache.SYNTAX:where:EXAMPLE:RELATED COMMANDS:ip arpdelete intf = <

E-DOC-CTC-20061027-0004 v1.0IP Commands431ip arplistDisplay the ARP cache.SYNTAX:EXAMPLE:RELATED COMMANDS:ip arplist=>ip arplistInterface IP-addres

E-DOC-CTC-20061027-0004 v1.0IP Commands432ip configShow/set global IP stack configuration options.SYNTAX:where:ip config [forwarding = <{disabled |

E-DOC-CTC-20061027-0004 v1.0IP Commands433EXAMPLE:addrcheck Set the level of IP address checks. Choose between:> off: No address checking is perfor

E-DOC-CTC-20061027-0004 v1.0IP Commands434ip flushFlush all the static IP parameters.Dynamic configurations (for example from PPP or CIP links) remain

E-DOC-CTC-20061027-0004 v1.0IP Commands435ip ifaddCreate an IP interface.SYNTAX:where:EXAMPLE:RELATED COMMANDS:ip ifadd intf = <string>dest = &l

E-DOC-CTC-20061027-0004 v1.0ATM Commands22atm ifconfigConfigure an ATM interface.SYNTAX:where:iThe interface to be configured must not be connected at

E-DOC-CTC-20061027-0004 v1.0IP Commands436ip ifattachAttach an IP interface.SYNTAX:where:EXAMPLE:RELATED COMMANDS:ip ifattach intf = <string>int

E-DOC-CTC-20061027-0004 v1.0IP Commands437ip ifconfigConfigure the parameters of an IP interface.SYNTAX:where:ip ifconfig intf = <string>[mtu =

E-DOC-CTC-20061027-0004 v1.0IP Commands438EXAMPLE:=>ip iflistInterface Group MTU RX TX TX-Drop Status HW-address0 loop local 65535 123966 75177 0 [

E-DOC-CTC-20061027-0004 v1.0IP Commands439ip ifdeleteDelete an IP interface.SYNTAX:where:EXAMPLE:RELATED COMMANDS:ip ifdelete intf = <string>int

E-DOC-CTC-20061027-0004 v1.0IP Commands440ip ifdetachDetach an IP interface.SYNTAX:where:EXAMPLE:RELATED COMMANDS:ip ifdetach intf = <string>int

E-DOC-CTC-20061027-0004 v1.0IP Commands441ip iflistDisplay all the IP interfaces.SYNTAX:where:EXAMPLE:RELATED COMMANDS:ip iflist [expand = <{disabl

E-DOC-CTC-20061027-0004 v1.0IP Commands442ip ifwaitWait for a status change of an IP interface.SYNTAX:where:RELATED COMMANDS:ip ifwait intf = <stri

E-DOC-CTC-20061027-0004 v1.0IP Commands443ip ipaddAssign an IP address to an IP interface.SYNTAX:where:EXAMPLE:RELATED COMMANDS:ip ipadd intf = <st

E-DOC-CTC-20061027-0004 v1.0IP Commands444ip ipconfigModify an IP address configuration.SYNTAX:where:EXAMPLE:ip ipconfig addr = <ip-address>[pre

E-DOC-CTC-20061027-0004 v1.0IP Commands445ip ipdeleteRemove an IP address from an IP interface.SYNTAX:where:EXAMPLE:RELATED COMMANDS:ip ipdelete addr

E-DOC-CTC-20061027-0004 v1.0ATM Commands23EXAMPLE:ulp Select the Upper Layer Protocol (ULP) for this interface.Choose between:> ip (for a Routed IP

E-DOC-CTC-20061027-0004 v1.0IP Commands446ip iplistDisplay all the configured IP addresses.SYNTAX:EXAMPLE:RELATED COMMANDS:ip iplist=>ip iplistInte

E-DOC-CTC-20061027-0004 v1.0IP Commands447ip mcast rtaddAdd a multicast route to the multicast routing table.SYNTAX:where:RELATED COMMANDS:ip mcast rt

E-DOC-CTC-20061027-0004 v1.0IP Commands448ip mcast rtdeleteDelete a multicast route from the multicast routing table.SYNTAX:where:RELATED COMMANDS:ip

E-DOC-CTC-20061027-0004 v1.0IP Commands449ip mcast rtlistDisplay the multicast routing table.SYNTAX:where:RELATED COMMANDS:ip mcast rtlist [expand = &

E-DOC-CTC-20061027-0004 v1.0IP Commands450ip mcast flushFlush the multicast routing table.SYNTAX:RELATED COMMANDS:ip mcast fluship mcast rtadd Add a m

E-DOC-CTC-20061027-0004 v1.0IP Commands451ip rtaddAdd a route to the routing table.SYNTAX:where:ip rtadd dst = <ip-address>[dstmsk = <ip-mask

E-DOC-CTC-20061027-0004 v1.0IP Commands452EXAMPLE:RELATED COMMANDS:=>ip rtlistDestination Label Gateway Intf Mtrc Status10.0.0.0/24 10.0.0.140 eth0

E-DOC-CTC-20061027-0004 v1.0IP Commands453ip rtdeleteDelete a route from the routing table.SYNTAX:where:EXAMPLE:RELATED COMMANDS:ip rtdelete dst = <

E-DOC-CTC-20061027-0004 v1.0IP Commands454ip rtlistDisplay the routing table.SYNTAX:where:EXAMPLE:RELATED COMMANDS:ip rtlist [expand = <{disabled |

E-DOC-CTC-20061027-0004 v1.0IP Commands455ip auto flushFlush the autoIP interfaces.SYNTAX:ip auto flush

E-DOC-CTC-20061027-0004 v1.0ATM Commands24atm ifdeleteDelete an ATM interface.SYNTAX:where:EXAMPLE:RELATED COMMANDS:atm ifdelete intf = <string>

E-DOC-CTC-20061027-0004 v1.0IP Commands456ip auto ifaddCreate an autoIP interface.SYNTAX:where:EXAMPLE:RELATED COMMANDS:ip auto ifadd intf = <strin

E-DOC-CTC-20061027-0004 v1.0IP Commands457ip auto ifattachSelect and assign a link-local address to an autoIP interface.SYNTAX:where:EXAMPLE:RELATED C

E-DOC-CTC-20061027-0004 v1.0IP Commands458ip auto ifconfigConfigure an autoIP interface.SYNTAX:where:ip auto ifconfig intf = <string>[addr = <

E-DOC-CTC-20061027-0004 v1.0IP Commands459EXAMPLE:=> ip auto iflisteth0 : [INIT] 0.0.0.0poolstart = 169.254.1.1 poolend = 169.254.254.254 netmask =

E-DOC-CTC-20061027-0004 v1.0IP Commands460ip auto ifdeleteDelete an existing autoIP interface.SYNTAX:where:EXAMPLE:RELATED COMMANDS:ip auto ifdelete i

E-DOC-CTC-20061027-0004 v1.0IP Commands461ip auto ifdetachRelease the link-local address for the given autoIP interface.SYNTAX:where:EXAMPLE:RELATED C

E-DOC-CTC-20061027-0004 v1.0IP Commands462ip auto iflistDisplay the autoIP interfaces.SYNTAX:where:EXAMPLE:RELATED COMMANDS:ip auto iflist [intf = <

E-DOC-CTC-20061027-0004 v1.0IP Commands463ip debug httpprobeSend a HTTP probe.This HTTP probe will measure the Round Trip Time (RTT) taken to connect

E-DOC-CTC-20061027-0004 v1.0IP Commands464ip debug sendtoSend UDP packets.SYNTAX:where:ip debug sendto addr = <ip-address>[count = <number{1-

E-DOC-CTC-20061027-0004 v1.0IP Commands465EXAMPLE:=>ip debug sendto addr=10.0.0.148 listen=on srcport=19 dstport=1025=>ip debug sendto addr=10.0

E-DOC-CTC-20061027-0004 v1.0ATM Commands25atm ifdetachDetach an ATM interface.SYNTAX:where:EXAMPLE:RELATED COMMANDS:atm ifdetach intf = <string>

E-DOC-CTC-20061027-0004 v1.0IP Commands466ip debug statsDisplay IP statistics.SYNTAX:EXAMPLE:ip debug stats=>ip debug statsTotal datagrams received

E-DOC-CTC-20061027-0004 v1.0IP Commands467ip debug traceconfigDisplay/modify the IP stack trace configuration.SYNTAX:where:ip debug traceconfig [input

E-DOC-CTC-20061027-0004 v1.0IP Commands468EXAMPLE:EXAMPLE:=>ip debug traceconfigInput traces : noneForward traces : noneOutput traces : noneDrop tr

E-DOC-CTC-20061027-0004 v1.0IPQoS Commands46923 IPQoS CommandsIntroductionThis chapter describes the commands of the ipqos command group.ContentsThis

E-DOC-CTC-20061027-0004 v1.0IPQoS Commands470ipqos configConfigure IPQoS for a given destination interface for the IPQoS queues instantiation.SYNTAX:w

E-DOC-CTC-20061027-0004 v1.0IPQoS Commands471priority Select the subqueue priority algorithm.Choose between:> wfq: Weighted Fair Queuing (WFQ) is u

E-DOC-CTC-20061027-0004 v1.0IPQoS Commands472EXAMPLE:RELATED COMMANDS:=>ipqos config dest=atm_pvc_8_35 state=enabled=>ipqos listName State Disca

E-DOC-CTC-20061027-0004 v1.0IPQoS Commands473ipqos listDisplay the IPQoS configuration.SYNTAX:EXAMPLE:RELATED COMMANDS:ipqos list=>ipqos listName S

E-DOC-CTC-20061027-0004 v1.0IPQoS Commands474ipqos ef configConfigure the IPQoS Expedited Forwarding (EF) timer for an interface.SYNTAX:where:EXAMPLE:

E-DOC-CTC-20061027-0004 v1.0IPQoS Commands475ipqos ef listDisplay the IPQoS EF timers.SYNTAX:EXAMPLE:RELATED COMMANDS:ipqos ef list=>ipqos ef listI

E-DOC-CTC-20061027-0004 v1.0ContentsiAbout this CLI Reference Guide ... 11 Root Commands ...

E-DOC-CTC-20061027-0004 v1.0ATM Commands26atm iflistDisplay the ATM interfaces. SYNTAX:where:EXAMPLE:RELATED COMMANDS:atm iflist [intf = <string>

E-DOC-CTC-20061027-0004 v1.0IPQoS Commands476ipqos ef statsDisplay the IPQoS EF timer statistics.SYNTAX:EXAMPLE:RELATED COMMANDS:ipqos ef stats=>ip

E-DOC-CTC-20061027-0004 v1.0IPQoS Commands477ipqos queue clearClear the IPQoS statistics.SYNTAX:EXAMPLE:RELATED COMMANDS:ipqos queue clear=>ipqos q

E-DOC-CTC-20061027-0004 v1.0IPQoS Commands478ipqos queue configModify the IPQoS subqueue configuration.SYNTAX:where:ipqos queue config dest = <stri

E-DOC-CTC-20061027-0004 v1.0IPQoS Commands479EXAMPLE:RELATED COMMANDS:maxbytes A number between 0 and 128.Represents the maximum size in kilobytes of

E-DOC-CTC-20061027-0004 v1.0IPQoS Commands480ipqos queue listDisplay the IPQoS subqueue configuration.SYNTAX:where:EXAMPLE:RELATED COMMANDS:ipqos queu

E-DOC-CTC-20061027-0004 v1.0IPQoS Commands481ipqos queue statsShow the IPQoS subqueue statistics.SYNTAX:where:EXAMPLE:RELATED COMMANDS:ipqos queue sta

E-DOC-CTC-20061027-0004 v1.0IPQoS Commands482

E-DOC-CTC-20061027-0004 v1.0Label Commands48324 Label CommandsIntroductionThis chapter describes the commands of the label command group.ContentsThis

E-DOC-CTC-20061027-0004 v1.0Label Commands484label addCreate a new label.SYNTAX:where:EXAMPLE:RELATED COMMANDS:label add name = <string>name The

E-DOC-CTC-20061027-0004 v1.0Label Commands485label deleteDelete a label.SYNTAX:where:EXAMPLE:RELATED COMMANDS:label delete name = <string>[force

E-DOC-CTC-20061027-0004 v1.0ATM Commands27atm bundle addAdd a new bundle of interfaces. SYNTAX:where:EXAMPLE:RELATED COMMANDS:atm bundle add name = &l

E-DOC-CTC-20061027-0004 v1.0Label Commands486label flushFlush all labels.SYNTAX:iThe flush command does not impact previously saved configurations.lab

E-DOC-CTC-20061027-0004 v1.0Label Commands487label listDisplay the labels.SYNTAX:where:EXAMPLE:RELATED COMMANDS:label list [name = <string>]name

E-DOC-CTC-20061027-0004 v1.0Label Commands488label modifyModify a label configuration.SYNTAX:where:label modify name = <string>[classification =

E-DOC-CTC-20061027-0004 v1.0Label Commands489ackclass The priority class of the ACK segments of the TCP connection.Choose between:> A number betwee

E-DOC-CTC-20061027-0004 v1.0Label Commands490EXAMPLE:=>label listName Class Def Ack Bidirect Inherit Tosmark Type Value Use TraceDSCP overwrite dsc

E-DOC-CTC-20061027-0004 v1.0Label Commands491label chain addAdd a new label chain.SYNTAX:where:EXAMPLE:RELATED COMMANDS:label chain add chain = <st

E-DOC-CTC-20061027-0004 v1.0Label Commands492label chain deleteDelete a label chain.SYNTAX:where:EXAMPLE:RELATED COMMANDS:label chain delete chain = &

E-DOC-CTC-20061027-0004 v1.0Label Commands493label chain flushFlush all label chains.SYNTAX:label chain flush

E-DOC-CTC-20061027-0004 v1.0Label Commands494label chain listDisplay a list of chains.SYNTAX:where:EXAMPLE:RELATED COMMANDS:label chain list [format =

E-DOC-CTC-20061027-0004 v1.0Label Commands495label rule addAdd a label rule.SYNTAX:where:label rule add chain = <chain name>[index = <number&

E-DOC-CTC-20061027-0004 v1.0ATM Commands28atm bundle attachAttach a bundle of interfaces.SYNTAX:where:EXAMPLE:RELATED COMMANDS:atm bundle attach name

E-DOC-CTC-20061027-0004 v1.0Label Commands496EXAMPLE:=>label rule listRules (flags: C=Constant, D=Dynamic, E=Enable, L=Log)=====Chain Nr. Flags Rul

E-DOC-CTC-20061027-0004 v1.0Label Commands497RELATED COMMANDS:label rule delete Delete a label rule.label rule list Display a list of label rules.

E-DOC-CTC-20061027-0004 v1.0Label Commands498label rule deleteDelete a label rule.SYNTAX:where:EXAMPLE:label rule delete chain = <string>index =

E-DOC-CTC-20061027-0004 v1.0Label Commands499RELATED COMMANDS:label rule add Add a label rule.label rule list Display a list of label rules.

E-DOC-CTC-20061027-0004 v1.0Label Commands500label rule flushFlush all label rules.The chains themselves are not removed.SYNTAX:where:iThe flush comma

E-DOC-CTC-20061027-0004 v1.0Label Commands501label rule listDisplay a list of label rules.SYNTAX:where:label rule list [chain = <string>][format

E-DOC-CTC-20061027-0004 v1.0Label Commands502EXAMPLE:RELATED COMMANDS:=>label rule list format=cli:label rule add chain=qos_default_labels index=1

E-DOC-CTC-20061027-0004 v1.0Label Commands503label rule modifyModify a label rule.SYNTAX:where:label rule modify chain = <chain name>index = <

E-DOC-CTC-20061027-0004 v1.0Label Commands504label rule debug clearClear the label rule statistics.SYNTAX:where:label rule debug clear [chain = <st

E-DOC-CTC-20061027-0004 v1.0Label Commands505EXAMPLE:RELATED COMMANDS:=>label rule debug stats chain=qos_labelschain index packets bytes-----------

E-DOC-CTC-20061027-0004 v1.0ATM Commands29atm bundle configModify a bundle of interfaces.SYNTAX:where:EXAMPLE:iThe bundle of interfaces to be configur

E-DOC-CTC-20061027-0004 v1.0Label Commands506label rule debug statsDisplay the label rule statistics.SYNTAX:where:EXAMPLE:RELATED COMMANDS:label rule

E-DOC-CTC-20061027-0004 v1.0Label Commands507label rule debug traceconfigDisplay or modify the rule trace configuration.SYNTAX:where:EXAMPLE:label rul

E-DOC-CTC-20061027-0004 v1.0Label Commands508

E-DOC-CTC-20061027-0004 v1.0Language Commands50925 Language CommandsIntroductionThis chapter describes the commands of the language command group.Cont

E-DOC-CTC-20061027-0004 v1.0Language Commands510language configSelect a language.SYNTAX:where:EXAMPLE:RELATED COMMANDS:language config [language = <

E-DOC-CTC-20061027-0004 v1.0Language Commands511language deleteDelete one or all language archives.SYNTAX:where:RELATED COMMANDS:language delete [file

Language CommandsE-DOC-CTC-20061027-0004 v1.0512language listList the available language archives.SYNTAX:EXAMPLE:RELATED COMMANDS:language list=>la

E-DOC-CTC-20061027-0004 v1.0MBUS Commands51326 MBUS CommandsIntroductionThis chapter describes the commands of the mbus command group.ContentsThis cha

E-DOC-CTC-20061027-0004 v1.0MBUS Commands514mbus client configModify client parameters.SYNTAX:where:RELATED COMMANDS:mbus client config [writelock = &

E-DOC-CTC-20061027-0004 v1.0MBUS Commands515mbus client execExecute mbus command.SYNTAX:where:mbus client exec cmd = <{addobject | deleteobject | g

E-DOC-CTC-20061027-0004 v1.0ATM Commands30atm bundle clearClear the bundle statistics.SYNTAX:where:atm bundle clear [name = <string>]name The na

E-DOC-CTC-20061027-0004 v1.0MBUS Commands516RELATED COMMANDS:mbus client config Modify client parameters.mbus client register Register cli client to m

E-DOC-CTC-20061027-0004 v1.0MBUS Commands517mbus client registerRegister cli client to mbus.SYNTAX:RELATED COMMANDS:mbus client registermbus client co

E-DOC-CTC-20061027-0004 v1.0MBUS Commands518mbus debug statsDisplay mbus statistics.SYNTAX:RELATED COMMANDS:mbus debug statsmbus debug traceconfig Mod

E-DOC-CTC-20061027-0004 v1.0MBUS Commands519mbus debug clearstatsReset MBUS statistics .SYNTAX:RELATED COMMANDS:mbus debug clearstatsmbus debug stats

E-DOC-CTC-20061027-0004 v1.0MBUS Commands520mbus debug traceconfigModify mbus trace settings.SYNTAX:where:RELATED COMMANDS:mbus debug traceconfig [lev

E-DOC-CTC-20061027-0004 v1.0MBUS Commands521mbus listobjectsDisplay the object instances.SYNTAX:where:RELATED COMMANDS:mbus listobjects [path = <qu

E-DOC-CTC-20061027-0004 v1.0MBUS Commands522mbus listtypesDisplay the registered objecttypes.SYNTAX:where:EXAMPLE:RELATED COMMANDS:mbus listtypes [pat

E-DOC-CTC-20061027-0004 v1.0MBUS Commands523mbus listenumsDisplay the registered enumtypes.SYNTAX:where:EXAMPLE:RELATED COMMANDS:mbus listenumss [dmtr

E-DOC-CTC-20061027-0004 v1.0MBUS Commands524mbus listcontextsDisplay the context instances .SYNTAX:where:RELATED COMMANDS:listcontexts [dmtree = <

E-DOC-CTC-20061027-0004 v1.0MBUS Commands525mbus listsubscriptionsDisplay the subscription instances .SYNTAX:where:RELATED COMMANDS:listsubscriptions

E-DOC-CTC-20061027-0004 v1.0ATM Commands31atm bundle deleteDelete a bundle of interfaces.SYNTAX:where:RELATED COMMANDS:atm bundle delete name = <st

E-DOC-CTC-20061027-0004 v1.0MBUS Commands526mbus debug loadobjectsLoad object instances of registered objecttypes.SYNTAX:where:RELATED COMMANDS:mbus d

E-DOC-CTC-20061027-0004 v1.0MBUS Commands527mbus debug unloadobjectsUnload object instances.SYNTAX:where:RELATED COMMANDS:mbus unloadobjects [path =

E-DOC-CTC-20061027-0004 v1.0MBUS Commands528mbus plugineventSimulate event from plugin .SYNTAX:where:mbus pluginevent ctxid = <number{0--2}> typ

E-DOC-CTC-20061027-0004 v1.0MBUS Commands529mbus unregisterUnregister a client/plugin context .SYNTAX:where:unregister id = <number> id message

E-DOC-CTC-20061027-0004 v1.0MBUS Commands530mbus client unregisterUnregister cli client from mbus .SYNTAX:unregister

E-DOC-CTC-20061027-0004 v1.0MEMM Commands53127 MEMM CommandsIntroductionThis chapter describes the commands of the memm command group.ContentsThis cha

E-DOC-CTC-20061027-0004 v1.0MEMM Commands532memm debug lock traceconfigModify lock trace settings.SYNTAX:where:memm debug lock traceconfig [level = &l

E-DOC-CTC-20061027-0004 v1.0MEMM Commands533memm debug traceconfigModify memm trace settings.SYNTAX:where:memm debug traceconfig [level = <number{0

E-DOC-CTC-20061027-0004 v1.0MEMM Commands534memm debug clearstatsClear time statisticsSYNTAX:memm debug clearstats

E-DOC-CTC-20061027-0004 v1.0MEMM Commands535memm debug lock statsDisplay lock statisticsSYNTAX:memm debug lock stats

E-DOC-CTC-20061027-0004 v1.0ATM Commands32atm bundle detachDetach a bundle of interfaces.SYNTAX:where:RELATED COMMANDS:atm bundle detach intf = <st

E-DOC-CTC-20061027-0004 v1.0MEMM Commands536memm listobjectsDisplay objects.SYNTAX:where:memm listobjects [name = <quoted string>]name Select ty

E-DOC-CTC-20061027-0004 v1.0MEMM Commands537memm statsDisplay memm statistics.SYNTAX:where:EXAMPLE:memm stats [name = <quoted string>]name Selec

E-DOC-CTC-20061027-0004 v1.0MEMM Commands538EXAMPLE:=>memm statspool name bytes cur,max,avail (max.%) count cur,max,avail refcur,max,avail---------

E-DOC-CTC-20061027-0004 v1.0MLP Commands53928 MLP Commands IntroductionThis chapter describes the commands of the mlp command group.ContentsThis chapt

E-DOC-CTC-20061027-0004 v1.0MLP Commands540mlp flushFlush all the Multi-Level access Policies (MLP) structures.SYNTAX:mlp flush

E-DOC-CTC-20061027-0004 v1.0MLP Commands541mlp importImport all the scores.SYNTAX:where:RELATED COMMANDS:mlp import [trace = <{disabled | enabled |

E-DOC-CTC-20061027-0004 v1.0MLP Commands542mlp debug exportExport all the scores.SYNTAX:RELATED COMMANDS:mlp debug exportmlp import Import all the sco

E-DOC-CTC-20061027-0004 v1.0MLP Commands543mlp debug statsDisplay MLP statistics.SYNTAX:EXAMPLE:mlp debug stats=>mlp debug statsRoles (cur/free/max

E-DOC-CTC-20061027-0004 v1.0MLP Commands544mlp debug traceconfigModify the MLP trace settings.SYNTAX:where:EXAMPLE:mlp debug traceconfig [trace = <

E-DOC-CTC-20061027-0004 v1.0MLP Commands545mlp privilege addAdd a privilege.SYNTAX:where:mlp privilege add name = <quoted string>type = <{acc

E-DOC-CTC-20061027-0004 v1.0ATM Commands33atm bundle flushFlush all bundles.SYNTAX:atm bundle flush

E-DOC-CTC-20061027-0004 v1.0MLP Commands546EXAMPLE:RELATED COMMANDS:=>mlp privilege list type=accessPrivilege (type) Description-------------------

E-DOC-CTC-20061027-0004 v1.0MLP Commands547mlp privilege addzoneAdd a zone to a privilege.SYNTAX:where:EXAMPLE:RELATED COMMANDS:iOnly one zone can be

E-DOC-CTC-20061027-0004 v1.0MLP Commands548mlp privilege configModify a privilege.SYNTAX:where:EXAMPLE:mlp privilege config name = <string>[desc

E-DOC-CTC-20061027-0004 v1.0MLP Commands549mlp privilege deleteDelete a privilege.SYNTAX:where:EXAMPLE:mlp privilege delete name = <string>name

E-DOC-CTC-20061027-0004 v1.0MLP Commands550RELATED COMMANDS:mlp privilege delete Add a privilege.mlp privilege list Display the privileges.

E-DOC-CTC-20061027-0004 v1.0MLP Commands551mlp privilege listDisplay the privileges.SYNTAX:where:mlp privilege list [name = <string>][type = <

E-DOC-CTC-20061027-0004 v1.0MLP Commands552EXAMPLE:RELATED COMMANDS:=>mlp privilege list type=servicePrivilege (type) Description------------------

E-DOC-CTC-20061027-0004 v1.0MLP Commands553mlp privilege removezoneRemove a zone from a privilege.SYNTAX:where:EXAMPLE:RELATED COMMANDS:iOnly one zone

E-DOC-CTC-20061027-0004 v1.0MLP Commands554mlp role addAdd a role.SYNTAX:where:EXAMPLE:mlp role add name = <quoted string>parent = <string>

E-DOC-CTC-20061027-0004 v1.0MLP Commands555RELATED COMMANDS:mlp role delete Delete a role.mlp role list Display the roles.

E-DOC-CTC-20061027-0004 v1.0ATM Commands34atm bundle ifaddAdd an interface on a bundle.SYNTAX:where:EXAMPLE:RELATED COMMANDS:iUp to 8 interfaces or (s

E-DOC-CTC-20061027-0004 v1.0MLP Commands556mlp role addprivAdd a privilege to a role.SYNTAX:where:EXAMPLE:RELATED COMMANDS:mlp role addpriv name = <

E-DOC-CTC-20061027-0004 v1.0MLP Commands557mlp role configModify the role.SYNTAX:where:EXAMPLE:mlp role config name = <string>[parent = <stri

E-DOC-CTC-20061027-0004 v1.0MLP Commands558mlp role deleteDelete a role.SYNTAX:where:EXAMPLE:RELATED COMMANDS:mlp role delete name = <string>nam

E-DOC-CTC-20061027-0004 v1.0MLP Commands559mlp role listDisplay the roles.SYNTAX:where:EXAMPLE:RELATED COMMANDS:mlp role list [name = <string>][

E-DOC-CTC-20061027-0004 v1.0MLP Commands560mlp role removeprivRemove a privilege from a role.SYNTAX:where:EXAMPLE:RELATED COMMANDS:mlp role removepriv

E-DOC-CTC-20061027-0004 v1.0NAT Commands56129 NAT CommandsIntroductionThis chapter describes the commands of the nat command group.ContentsThis chapte

E-DOC-CTC-20061027-0004 v1.0NAT Commands562nat configDisplay/modify global NAT configuration options.SYNTAX:where:EXAMPLE:nat config [trace = <{dis

E-DOC-CTC-20061027-0004 v1.0NAT Commands563nat flushFlush the current NAT configuration.SYNTAX:nat flush

E-DOC-CTC-20061027-0004 v1.0NAT Commands564nat ifconfigModify address translation on an IP interface.SYNTAX:where:EXAMPLE:RELATED COMMANDS:nat ifconfi

E-DOC-CTC-20061027-0004 v1.0NAT Commands565nat iflistDisplay the address translation configuration on all the interfaces.SYNTAX:EXAMPLE:RELATED COMMAN

E-DOC-CTC-20061027-0004 v1.0ATM Commands35atm bundle ifconfigConfigure an interface from a bundle.SYNTAX:where:iThe interface to be configured must no

E-DOC-CTC-20061027-0004 v1.0NAT Commands566nat mapaddAdd an address mapping to a Network Address Translation (NAT) enabled interface.SYNTAX:where:nat

E-DOC-CTC-20061027-0004 v1.0NAT Commands567inside_addr The inside (typically private) IP address.> Inbound: Represents the address(es) to be used a

E-DOC-CTC-20061027-0004 v1.0NAT Commands568outside_port The outside port number or range (only for maps of type napt).> For a NAPT map: Represents

E-DOC-CTC-20061027-0004 v1.0NAT Commands569EXAMPLE:RELATED COMMANDS:=>nat maplistIdx Type Interface Outside Address Inside Address Use1 NAPT eth0 a

E-DOC-CTC-20061027-0004 v1.0NAT Commands570nat mapdeleteDelete an address mapping from a NAT enabled interface.SYNTAX:where:EXAMPLE:RELATED COMMANDS:n

E-DOC-CTC-20061027-0004 v1.0NAT Commands571nat maplistDisplay the address mapping for a NAT enabled interface.SYNTAX:where:EXAMPLE:RELATED COMMANDS:na

E-DOC-CTC-20061027-0004 v1.0NAT Commands572nat tmpladdAdd an address mapping template.SYNTAX:where:nat tmpladd [intf = <string>][group = <{wa

E-DOC-CTC-20061027-0004 v1.0NAT Commands573outside_addr The outside (typically public) IP address.> Inbound: This map will only apply if the desti

E-DOC-CTC-20061027-0004 v1.0NAT Commands574protocol The IP protocol to be used as filter for inbound/outbound traffic. The NAT map only applies if the

E-DOC-CTC-20061027-0004 v1.0NAT Commands575EXAMPLE:RELATED COMMANDS:=>nat tmpladd intf=myPPP_ppp type=napt outside_addr=100.100.100.1=>nat tmpll

E-DOC-CTC-20061027-0004 v1.0Contentsiiatm debug aal5stats ...

E-DOC-CTC-20061027-0004 v1.0ATM Commands36atm bundle ifdeleteRemove an interface from a bundle.SYNTAX:where:EXAMPLE:RELATED COMMANDS:atm bundle ifdele

E-DOC-CTC-20061027-0004 v1.0NAT Commands576nat tmpldeleteDelete an address mapping template.SYNTAX:where:EXAMPLE:RELATED COMMANDS:nat tmpldelete index

E-DOC-CTC-20061027-0004 v1.0NAT Commands577nat tmpllistDisplay the address mapping templates.SYNTAX:where:EXAMPLE:RELATED COMMANDS:nat tmpllist [expan

E-DOC-CTC-20061027-0004 v1.0NAT Commands578nat tmplinstInstantiate address mapping templates for a given dynamic address.SYNTAX:where:EXAMPLE:RELATED

E-DOC-CTC-20061027-0004 v1.0PPP Commands57930 PPP CommandsIntroductionThis chapter describes the commands of the ppp command group.ContentsThis chapte

E-DOC-CTC-20061027-0004 v1.0PPP Commands580ppp flushFlush all PPP interfaces.SYNTAX:iThe flush command does not impact previously saved configurations

E-DOC-CTC-20061027-0004 v1.0PPP Commands581ppp ifaddCreate a new PPP interface. SYNTAX:where:EXAMPLE:ppp ifadd intf = <string>intf The name for

E-DOC-CTC-20061027-0004 v1.0PPP Commands582RELATED COMMANDS:ppp ifdelete Delete a PPP interface.ppp iflist Display the PPP interfaces.

E-DOC-CTC-20061027-0004 v1.0PPP Commands583ppp ifattachAttach a PPP interface.SYNTAX:where:ppp ifattach intf = <string>intf The name of the PPP

E-DOC-CTC-20061027-0004 v1.0PPP Commands584EXAMPLE:RELATED COMMANDS:=>ppp iflistInternet: dest : RELAY [00:00:00]Retry : 10mode = IP routingflags =

E-DOC-CTC-20061027-0004 v1.0PPP Commands585ppp ifconfigConfigure a PPP interface.SYNTAX:where:iThe interface to be configured must not be connected at

E-DOC-CTC-20061027-0004 v1.0ATM Commands37atm bundle listDisplay the current bundles.SYNTAX:EXAMPLE:RELATED COMMANDS:atm bundle list=>atm bundle li

E-DOC-CTC-20061027-0004 v1.0PPP Commands586password The password for remote PAP/CHAP authentication. OPTIONALacname The Access Concentrator name for a

E-DOC-CTC-20061027-0004 v1.0PPP Commands587silent Do not send anything at startup and just listen for incoming LCP messages (enabled) or retry up to 1

E-DOC-CTC-20061027-0004 v1.0PPP Commands588dnsmetric A number between 1 and 100.Represents the DNS route metric to be used for the negotiated DNS serv

E-DOC-CTC-20061027-0004 v1.0PPP Commands589EXAMPLE:=>ppp iflistInternet: dest : RELAY [00:00:00]Retry : 10mode = IP routingflags = echo magic accom

E-DOC-CTC-20061027-0004 v1.0PPP Commands590ppp ifdeleteDelete a PPP interface.SYNTAX:where:EXAMPLE:ppp ifdelete intf = <intfname>intf The name o

E-DOC-CTC-20061027-0004 v1.0PPP Commands591RELATED COMMANDS:ppp ifadd Create a new PPP interface.ppp iflist Display the PPP interfaces.

E-DOC-CTC-20061027-0004 v1.0PPP Commands592ppp ifdetachDetach a PPP interface.SYNTAX:where:ppp ifdetach intf = <intfname>intf The name of the PP

E-DOC-CTC-20061027-0004 v1.0PPP Commands593EXAMPLE:RELATED COMMANDS:=>ppp iflistInternet: dest : RELAY [00:00:00]Retry : 10mode = IP routingflags =

E-DOC-CTC-20061027-0004 v1.0PPP Commands594ppp iflistDisplay the PPP interfaces. SYNTAX:where:EXAMPLE INPUT/OUTPUT :RELATED COMMANDS:ppp iflist [intf

E-DOC-CTC-20061027-0004 v1.0PPP Commands595ppp ifscanScan a PPPoE interface for available Access Concentrator and Service names.SYNTAX:where:EXAMPLE:i

E-DOC-CTC-20061027-0004 v1.0ATM Commands38atm cac configConfigure the ATM connection admission control.SYNTAX:where:EXAMPLE:RELATED COMMANDS:atm cac c

E-DOC-CTC-20061027-0004 v1.0PPP Commands596ppp rtaddAdd a route to the routing table when the PPP link comes up.This route configuration will determin

E-DOC-CTC-20061027-0004 v1.0PPP Commands597EXAMPLE:RELATED COMMANDS:metric The route metric, in other words, the cost factor of the route.Practically,

E-DOC-CTC-20061027-0004 v1.0PPP Commands598ppp rtdeleteDelete the route for a PPP link.SYNTAX:where:iThe interface must not be connected when a route

E-DOC-CTC-20061027-0004 v1.0PPP Commands599EXAMPLE:RELATED COMMANDS:=>ppp iflistInternet: dest : RELAY [00:00:00]Retry : 10mode = IP routingflags =

E-DOC-CTC-20061027-0004 v1.0PPP Commands600ppp relay flushRemove all Ethernet interfaces from the PPP relay agent list and terminate all sessions.SYNT

E-DOC-CTC-20061027-0004 v1.0PPP Commands601ppp relay ifaddAdd an Ethernet interface to the PPP relay list.SYNTAX:where:EXAMPLE:RELATED COMMANDS:ppp re

E-DOC-CTC-20061027-0004 v1.0PPP Commands602ppp relay ifconfigModify an ethernet interface from the PPP relay agent list.SYNTAX:where:ppp relay ifconfi

E-DOC-CTC-20061027-0004 v1.0PPP Commands603ppp relay ifdeleteDelete an Ethernet interface from the PPP relay agent list.SYNTAX:where:EXAMPLE:RELATED C

E-DOC-CTC-20061027-0004 v1.0PPP Commands604ppp relay iflistDisplay all Ethernet interfaces added to the PPP relay agent list.SYNTAX:where:EXAMPLE:RELA

E-DOC-CTC-20061027-0004 v1.0PPP Commands605ppp relay sesslistAdd an Ethernet interface to the PPP relay list.SYNTAX:where:ppp relay ifadd intf = <s

E-DOC-CTC-20061027-0004 v1.0ATM Commands39atm cac listDisplay all the CAC parameters.SYNTAX:EXAMPLE:RELATED COMMANDS:atm cac list{Administrator}[atm c

E-DOC-CTC-20061027-0004 v1.0PPP Commands606

E-DOC-CTC-20061027-0004 v1.0PPTP Commands60731 PPTP CommandsIntroductionThis chapter describes the commands of the pptp command group.ContentsThis cha

E-DOC-CTC-20061027-0004 v1.0PPTP Commands608pptp ifaddAdd a Point-to-Point Tunneling Protocol (PPTP) profile.SYNTAX:where:iBackwards compatible with p

E-DOC-CTC-20061027-0004 v1.0PPTP Commands609pptp flushFlush the complete PPTP configuration.SYNTAX:iThe flush command does not impact previously saved

E-DOC-CTC-20061027-0004 v1.0PPTP Commands610pptp listShow the current PPTP configuration.SYNTAX:EXAMPLE:pptp list=>pptp listDialstr Destination QoS

E-DOC-CTC-20061027-0004 v1.0PPTP Commands611pptp profaddDefine a new PPTP profile.SYNTAX:where:EXAMPLE:pptp profadd name = <string>[qos = <st

E-DOC-CTC-20061027-0004 v1.0PPTP Commands612RELATED COMMANDS:pptp profdelete Define a new PPTP profile.pptp proflist Display all the current PPTP prof

E-DOC-CTC-20061027-0004 v1.0PPTP Commands613pptp profdeleteDelete a PPTP profile.SYNTAX:where:EXAMPLE:RELATED COMMANDS:pptp profdelete name <string

E-DOC-CTC-20061027-0004 v1.0PPTP Commands614pptp proflistDisplay all the current PPTP profiles.SYNTAX:EXAMPLE:RELATED COMMANDS:pptp proflist=>pptp

E-DOC-CTC-20061027-0004 v1.0Script Commands61532 Script CommandsIntroductionThis chapter describes the commands of the script command group.Scripting

E-DOC-CTC-20061027-0004 v1.0ATM Commands40atm cac overbookingConfigure ATM overbooking parameters.SYNTAX:where:EXAMPLE:RELATED COMMANDS:atm cac overbo

E-DOC-CTC-20061027-0004 v1.0Script Commands616script addAdd a line to a script.SYNTAX:where:RELATED COMMANDS:script add name = <string>[index =

E-DOC-CTC-20061027-0004 v1.0Script Commands617script deleteDelete a complete script or a line from a script.SYNTAX:where:RELATED COMMANDS:script delet

E-DOC-CTC-20061027-0004 v1.0Script Commands618script flushFlush all scripts.SYNTAX:iThe flush command does not impact previously saved configurations.

E-DOC-CTC-20061027-0004 v1.0Script Commands619script listDisplay a script or all scripts.SYNTAX:where:EXAMPLESome of the default scripts are shown bel

E-DOC-CTC-20061027-0004 v1.0Script Commands620script runRun a script.SYNTAX:where:script run name = <string>pars = <string>name Name of th

E-DOC-CTC-20061027-0004 v1.0Service Commands62133 Service CommandsIntroductionThis chapter describes the commands of the service command group.Content

E-DOC-CTC-20061027-0004 v1.0Service Commands622service host assignAssign a service to a host device.SYNTAX:where:EXAMPLE:RELATED COMMANDS:service hos

E-DOC-CTC-20061027-0004 v1.0Service Commands623service host configModify and/or display global service configuration options.SYNTAX:where:EXAMPLE:ser

E-DOC-CTC-20061027-0004 v1.0Service Commands624service host addAdd a host service.SYNTAX:where:EXAMPLE:RELATED COMMANDS:service host add name = <qu

E-DOC-CTC-20061027-0004 v1.0Service Commands625service host deleteDelete a host service.SYNTAX:where:EXAMPLE:RELATED COMMANDS:service host delete name

E-DOC-CTC-20061027-0004 v1.0ATM Commands41atm debug aal5statsDisplay ATM Adaptation Layer 5 (AAL5) port specific ATM statistics.SYNTAX:where:RELATED C

E-DOC-CTC-20061027-0004 v1.0Service Commands626service host disableDisable a host service.SYNTAX:where:EXAMPLE:RELATED COMMANDS:service host disable [

E-DOC-CTC-20061027-0004 v1.0Service Commands627service host flushFlush all host services.SYNTAX:service host flush

E-DOC-CTC-20061027-0004 v1.0Service Commands628service host listDisplay a list of host services.SYNTAX:where:EXAMPLE:RELATED COMMANDS:service host lis

E-DOC-CTC-20061027-0004 v1.0Service Commands629service host statsShow the host service statistics.SYNTAX:EXAMPLE:service host stats=>service host s

E-DOC-CTC-20061027-0004 v1.0Service Commands630service host triggerlistList all triggers.SYNTAX:EXAMPLE:service host triggerlist=>service triggerli

E-DOC-CTC-20061027-0004 v1.0Service Commands631service host rule addCreate/define a host service portmap.SYNTAX:where:RELATED COMMANDS:service host ru

E-DOC-CTC-20061027-0004 v1.0Service Commands632service host rule deleteDelete a host service portmap.SYNTAX:where:RELATED COMMANDS:service host rule d

E-DOC-CTC-20061027-0004 v1.0Service Commands633service system ifaddAdd an interface group to the access list.SYNTAX:where:EXAMPLE:RELATED COMMANDS:ser

E-DOC-CTC-20061027-0004 v1.0Service Commands634service system ifdeleteDelete an interface group from the access list.SYNTAX:where:EXAMPLE:RELATED COMM

E-DOC-CTC-20061027-0004 v1.0Service Commands635service system ipaddAdd an IP address (range) to the access list.SYNTAX:where:EXAMPLE:RELATED COMMANDS:

E-DOC-CTC-20061027-0004 v1.0ATM Commands42atm debug gstatsDisplay ATM global statistics.SYNTAX:where:EXAMPLE:RELATED COMMANDS:atm debug gstats [clear

E-DOC-CTC-20061027-0004 v1.0Service Commands636service system ipdeleteDelete an IP address (range) from the access list.SYNTAX:where:EXAMPLE:RELATED C

E-DOC-CTC-20061027-0004 v1.0Service Commands637service system listDisplay the system services.SYNTAX:where:service system list [name = <string>]

E-DOC-CTC-20061027-0004 v1.0Service Commands638EXAMPLE:RELATED COMMANDS:=>service system listIdx Name Protocol SrcPort DstPort Group State---------

E-DOC-CTC-20061027-0004 v1.0Service Commands639service system mapaddAdd a port map for a system service.SYNTAX:where:RELATED COMMANDS:service system m

E-DOC-CTC-20061027-0004 v1.0Service Commands640service system mapdeleteDelete a port map for a system service.SYNTAX:where:RELATED COMMANDS:service sy

E-DOC-CTC-20061027-0004 v1.0Service Commands641service system modifyModify a system service.SYNTAX:where:RELATED COMMANDS:service system modify name =

E-DOC-CTC-20061027-0004 v1.0Service Commands642

E-DOC-CTC-20061027-0004 v1.0SNMP Commands64334 SNMP CommandsIntroductionThis chapter describes the commands of the snmp command group.ContentsThis cha

E-DOC-CTC-20061027-0004 v1.0SNMP Commands644snmp configShow/set global Simple Network Management Protocol (SNMP) parameters.SYNTAX:where:EXAMPLE:snmp

E-DOC-CTC-20061027-0004 v1.0SNMP Commands645snmp getGet from the supplied SNMP Object IDentifier (OID).For example: get ObjectId=.1.3.6.1.2.1.1.1.0.SY

E-DOC-CTC-20061027-0004 v1.0ATM Commands43atm debug portstatsDisplay port specific ATM statistics.SYNTAX:where:EXAMPLE:RELATED COMMANDS:atm debug port

E-DOC-CTC-20061027-0004 v1.0SNMP Commands646snmp getnextGetNext from the supplied SNMP OID.SYNTAX:where:EXAMPLE:RELATED COMMANDS:snmp getnext [ObjectI

E-DOC-CTC-20061027-0004 v1.0SNMP Commands647snmp walkWalk from the supplied SNMP OID.SYNTAX:where:EXAMPLE:RELATED COMMANDS:snmp walk [ObjectId = <s

E-DOC-CTC-20061027-0004 v1.0SNMP Commands648snmp community addConfigure an SNMP community string to allow SNMP access over IP.SYNTAX:where:EXAMPLE:REL

E-DOC-CTC-20061027-0004 v1.0SNMP Commands649snmp community deleteDelete an SNMP community string to prevent SNMP access over IP.SYNTAX:where:EXAMPLE:R

E-DOC-CTC-20061027-0004 v1.0SNMP Commands650snmp community listList all SNMP community strings in use for SNMP access over IP.SYNTAX:EXAMPLE:RELATED C

E-DOC-CTC-20061027-0004 v1.0SNMP Commands651snmp community modifyModify an SNMP community string to allow SNMP access over IP.SYNTAX:where:snmp commun

E-DOC-CTC-20061027-0004 v1.0SNMP Commands652snmp ifaddCreate a new SNMP interface.SYNTAX:where:EXAMPLE:RELATED COMMANDS:snmp ifadd intf = <string&g

E-DOC-CTC-20061027-0004 v1.0SNMP Commands653snmp ifdeleteDelete an SNMP interface.SYNTAX:where:EXAMPLE:RELATED COMMANDS:snmp ifdelete intf = <stri

E-DOC-CTC-20061027-0004 v1.0SNMP Commands654snmp ifattachAttach an SNMP interface.SYNTAX:where:EXAMPLE:RELATED COMMANDS:snmp ifattach intf = <strin

E-DOC-CTC-20061027-0004 v1.0SNMP Commands655snmp ifdetachDetach an SNMP interface.SYNTAX:where:EXAMPLE:RELATED COMMANDS:snmp ifdetach intf = <strin

E-DOC-CTC-20061027-0004 v1.0ATM Commands44atm oam configModify the ATM Operation and Maintenance (OAM) settings.SYNTAX:where:RELATED COMMANDS:atm oam

E-DOC-CTC-20061027-0004 v1.0SNMP Commands656snmp ifconfigModify an SNMP interface.SYNTAX:where:EXAMPLE:RELATED COMMANDS:snmp ifconfig intf = <strin

E-DOC-CTC-20061027-0004 v1.0SNMP Commands657snmp iflistDisplay the SNMP interfaces.SYNTAX:where:snmp iflist [intf = <string>]intf The name of an

E-DOC-CTC-20061027-0004 v1.0SNMP Commands658

E-DOC-CTC-20061027-0004 v1.0SNTP Commands65935 SNTP CommandsIntroductionThis chapter describes the commands of the Simple Network Time Protocol (SNTP)

E-DOC-CTC-20061027-0004 v1.0SNTP Commands660sntp addAdd a Network Time Protocol (NTP) server to the NTP server list.The internal Thomson ST real time

E-DOC-CTC-20061027-0004 v1.0SNTP Commands661sntp configModify/display the SNTP client configuration.SYNTAX:where:EXAMPLE:sntp config [enable = <{en

E-DOC-CTC-20061027-0004 v1.0SNTP Commands662sntp deleteDelete an NTP server from the NTP server list.SYNTAX:where:EXAMPLE:RELATED COMMANDS:sntp delete

E-DOC-CTC-20061027-0004 v1.0SNTP Commands663sntp flushFlush the NTP server list and the SNTP client configuration.SYNTAX:sntp flush

E-DOC-CTC-20061027-0004 v1.0SNTP Commands664sntp listList the NTP servers.SYNTAX:EXAMPLE:DESCRIPTION:The status of an NTP server can be:> Not used:

E-DOC-CTC-20061027-0004 v1.0Software Commands66536 Software CommandsIntroductionThis chapter describes the commands of the software command group.Cont

E-DOC-CTC-20061027-0004 v1.0ATM Commands45atm oam listDisplay the ATM OAM settings.SYNTAX:EXAMPLE:RELATED COMMANDS:atm oam list=>atm oam listOAM co

E-DOC-CTC-20061027-0004 v1.0Software Commands666software downloadDownload parameters.SYNTAX:where:software download filetype = <{firmware | configu

E-DOC-CTC-20061027-0004 v1.0Software Commands667software upgradeReboot the modem to initiate the SW upgrade.New software available on a remote LAN hos

E-DOC-CTC-20061027-0004 v1.0Software Commands668software versionDisplay the software version.SYNTAX:EXAMPLE:software version=>software versionFlash

E-DOC-CTC-20061027-0004 v1.0System Commands66937 System CommandsIntroductionThis chapter describes the commands of the system command group.ContentsTh

E-DOC-CTC-20061027-0004 v1.0System Commands670system configSet/change the system configuration parameters.SYNTAX:where:!For a good operation of UPnP a

E-DOC-CTC-20061027-0004 v1.0System Commands671EXAMPLE:autosavedelay A number between 0 and 600.Represents the autosave delay in seconds (0 for immedia

E-DOC-CTC-20061027-0004 v1.0System Commands672system flushFlush the current system configuration.The system password and the system config settings (d

E-DOC-CTC-20061027-0004 v1.0System Commands673system localeSet/get the regional settings.SYNTAX:where:system locale [dec_symbol = <{, | .}>][gro

E-DOC-CTC-20061027-0004 v1.0System Commands674EXAMPLE:time_format Set the time format.Choose between:> iso> hmmss.The default is iso.Note h = ho

E-DOC-CTC-20061027-0004 v1.0System Commands675system rebootReboot the Thomson ST.SYNTAX:EXAMPLE:RELATED COMMANDS:!Non-saved configuration settings wil

E-DOC-CTC-20061027-0004 v1.0Contentsiii6 Connection Commands... 81connection appconfig...

E-DOC-CTC-20061027-0004 v1.0ATM Commands46atm oam modifyModify the ATM OAM data blocking mode.SYNTAX:where:atm oam modify port = <{dsl0} or number&

E-DOC-CTC-20061027-0004 v1.0System Commands676system resetReset the Thomson ST to its factory or ISP defaults and reboot the device.SYNTAX:where:EXAMP

E-DOC-CTC-20061027-0004 v1.0System Commands677RELATED COMMANDS:sntp config Modify/display the SNTP client configuration.

E-DOC-CTC-20061027-0004 v1.0System Commands678system timedrebootSet or change a timed reboot for the Thomson ST.SYNTAXwhere:EXAMPLE:RELATED COMMANDS:t

E-DOC-CTC-20061027-0004 v1.0System Commands679system debug autosaveAutosave debugging commandsSYNTAX:where:system debug autosave [trace = <{disable

E-DOC-CTC-20061027-0004 v1.0System Commands680system debug statsShow the Thomson ST CPU and memory statistics.SYNTAX:where:EXAMPLE:DESCRIPTION:>CHI

E-DOC-CTC-20061027-0004 v1.0System Commands681system ra configConfigure Remote management access parameters.SYNTAX:where:EXAMPLE:system ra config [sec

E-DOC-CTC-20061027-0004 v1.0System Commands682system rtc synchronizeDo a SNTP update and synchronize the realtime clock.SYNTAX:system rtc synchro-nize

E-DOC-CTC-20061027-0004 v1.0System Commands683system rtc settimeSet/get date, time, timezone, daylight savings time, uptime.When synchronization with

E-DOC-CTC-20061027-0004 v1.0System Commands684

E-DOC-CTC-20061027-0004 v1.0Systemlog Commands68538 Systemlog CommandsIntroductionThis chapter describes the commands of the systemlog command group.C

E-DOC-CTC-20061027-0004 v1.0ATM Commands47EXAMPLE:RELATED COMMANDS:=>atm oam listOAM config dump-------------------CLP bit value : 1Loopback id : 6

E-DOC-CTC-20061027-0004 v1.0Systemlog Commands686systemlog flushFlush all messages in the internal Syslog message buffer.SYNTAX:systemlog flush

E-DOC-CTC-20061027-0004 v1.0Systemlog Commands687systemlog showShow messages in the internal Syslog message buffer.SYNTAX:where:systemlog show [fac =

E-DOC-CTC-20061027-0004 v1.0Systemlog Commands688EXAMPLE:=>syslog msgbuf show fac=kern sev=emerg hist=enabled<0> SysUpTime: 14:45:43 KERNEL C

E-DOC-CTC-20061027-0004 v1.0Systemlog Commands689systemlog sendSend messages from the internal Syslog message buffer to a specified local or remote sy

E-DOC-CTC-20061027-0004 v1.0Systemlog Commands690systemlog DBG dbg_syslogPerform a syslog call.SYNTAX:where:systemlog DBG dbg_syslog priority = <

E-DOC-CTC-20061027-0004 v1.0Systemlog Commands691systemlog DBG dbg_long_messGenerate a long syslog message call.SYNTAX:systemlog DBG dbg_long_mess

E-DOC-CTC-20061027-0004 v1.0Systemlog Commands692systemlog DBG dbg_burstPerform a syslog message burst.SYNTAX:systemlog DBG dbg_burst

E-DOC-CTC-20061027-0004 v1.0Systemlog Commands693systemlog DBG dbg_contentsShow the contents of the message buffer.SYNTAX:systemlog DBG dbg_contents

E-DOC-CTC-20061027-0004 v1.0Systemlog Commands694

E-DOC-CTC-20061027-0004 v1.0TLS Commands69539 TLS CommandsIntroductionThis chapter describes the commands of the tls command group.ContentsThis chapte

E-DOC-CTC-20061027-0004 v1.0ATM Commands48atm oam pingSend ATM loopback cells.SYNTAX:where:EXAMPLE:RELATED COMMANDS:atm oam ping dest = <string>

E-DOC-CTC-20061027-0004 v1.0TLS Commands696tls acs-client configDisplay/modify acs-client tls settings.SYNTAX:where:tls acs-client config [state = <

E-DOC-CTC-20061027-0004 v1.0TLS Commands697tls acs-client cert addAdd a new certificate.SYNTAX:where:RELATED COMMANDS:tls acs-client cert add filenam

E-DOC-CTC-20061027-0004 v1.0TLS Commands698tls acs-client cert deleteDelete a certificate.SYNTAX:where:RELATED COMMANDS:tls acs-client cert delete ind

E-DOC-CTC-20061027-0004 v1.0TLS Commands699tls acs-client cert listList certificates.SYNTAX:where:RELATED COMMANDS:tls acs-client cert list [index = &

E-DOC-CTC-20061027-0004 v1.0TLS Commands700tls https-server configDisplay/modify https-server tls settings.SYNTAX:where:RELATED COMMANDS:tls https-ser

E-DOC-CTC-20061027-0004 v1.0TLS Commands701tls https-server cert addAdd a new certificate.SYNTAX:where:RELATED COMMANDS:tls https-server cert add file

E-DOC-CTC-20061027-0004 v1.0TLS Commands702tls https-server cert deleteDelete a certificate.SYNTAX:where:RELATED COMMANDS:tls https-server cert delete

E-DOC-CTC-20061027-0004 v1.0TLS Commands703tls https-server cert listList certificates.SYNTAX:where:RELATED COMMANDS:tls https-server cert list index

E-DOC-CTC-20061027-0004 v1.0TLS Commands704 tls self cert listDescription.SYNTAX:where: tls self cert list [index = <number>][expand = <{disa

E-DOC-CTC-20061027-0004 v1.0Upgrade Commands70540 Upgrade CommandsIntroductionThis chapter describes the commands of the upgrade command group.Content

E-DOC-CTC-20061027-0004 v1.0ATM Commands49atm oam cc listDisplay Continuity Check (CC) configuration.SYNTAX:EXAMPLE:RELATED COMMANDS:atm oam cc list=&

E-DOC-CTC-20061027-0004 v1.0Upgrade Commands706upgrade configChange the upgrade daemon configuration.SYNTAX:where:EXAMPLE:upgrade config [state = <

E-DOC-CTC-20061027-0004 v1.0Upgrade Commands707upgrade startStart a new upgrade.SYNTAX:where:upgrade start protocol = <{tftp|ftp|http|https}>[se

E-DOC-CTC-20061027-0004 v1.0Upgrade Commands708upgrade debug traceconfigEnable/disable upgrade daemon tracing.SYNTAX:where:upgrade debug traceconfig s

E-DOC-CTC-20061027-0004 v1.0Upgrade Commands709upgrade debug sesslistDisplay the list of sessions.SYNTAX:EXAMPLE:upgrade debug sesslist=>:upgrade d

E-DOC-CTC-20061027-0004 v1.0Upgrade Commands710upgrade profile addAdd a new file profile description.SYNTAX:where:RELATED COMMANDS:upgrade profile add

E-DOC-CTC-20061027-0004 v1.0Upgrade Commands711upgrade profile modifyModify a file profile description.SYNTAX:where:RELATED COMMANDS:upgrade profile m

E-DOC-CTC-20061027-0004 v1.0Upgrade Commands712upgrade profile deleteDelete a file profile description.SYNTAX:where:RELATED COMMANDS:upgrade profile d

E-DOC-CTC-20061027-0004 v1.0Upgrade Commands713upgrade profile listDisplay a list of the file profile descriptions.SYNTAX:RELATED COMMANDS:upgrade pro

E-DOC-CTC-20061027-0004 v1.0Upgrade Commands714

E-DOC-CTC-20061027-0004 v1.0UPnP Commands71541 UPnP CommandsIntroductionThis chapter describes the commands of the upnp command group.ContentsThis cha

E-DOC-CTC-20061027-0004 v1.0ATM Commands50atm oam cc modifyModify CC on the connection.SYNTAX:where:RELATED COMMANDS:atm oam modify port = <{dsl0|d

E-DOC-CTC-20061027-0004 v1.0UPnP Commands716upnp configConfigure the UPnP™ parameter(s).SYNTAX:where:upnp config [maxage = <number{60-999999}>]

E-DOC-CTC-20061027-0004 v1.0UPnP Commands717EXAMPLE:=>upnp configssdp max-age : 1800write mode : fullsafe nat entries : disabledpreferred address :

E-DOC-CTC-20061027-0004 v1.0UPnP Commands718upnp flushFlush the UPnP™ configuration. The UPnP configuration will be reset to the default configuration

E-DOC-CTC-20061027-0004 v1.0UPnP Commands719upnp listList all registered devices. SYNTAX:where:EXAMPLE:iUse this command to check whether a PPP connec

E-DOC-CTC-20061027-0004 v1.0UPnP Commands720

E-DOC-CTC-20061027-0004 v1.0User Commands72142 User CommandsIntroductionThis chapter describes the commands of the user command group.ContentsThis cha

E-DOC-CTC-20061027-0004 v1.0User Commands722user addAdd a user.SYNTAX:where:iYou can only add a user whose privileges are the same or lower than your

E-DOC-CTC-20061027-0004 v1.0User Commands723EXAMPLE:In the example below, the user Administrator creates a new user JohnDoe. This user has lower acces

E-DOC-CTC-20061027-0004 v1.0User Commands724user configModify a user.SYNTAX:where:iYou can only modify a user whose privileges are the same or lower t

E-DOC-CTC-20061027-0004 v1.0User Commands725EXAMPLE:{Superuser}=>user listUser Role==== ====Superuser rootaPoweruser Poweruser{Superuser}=>user

E-DOC-CTC-20061027-0004 v1.0ATM Commands51atm oam cc sendSend CC activate/deactivate to connection.SYNTAX:where:RELATED COMMANDS:atm oam cc send port

E-DOC-CTC-20061027-0004 v1.0User Commands726user deleteDelete a user.SYNTAX:where:EXAMPLE:RELATED COMMANDS:iYou can only delete a user whose privilege

E-DOC-CTC-20061027-0004 v1.0User Commands727user flushFlush the users.SYNTAX:EXAMPLE:When this Telnet session is terminated and a new Telnet session i

E-DOC-CTC-20061027-0004 v1.0User Commands728user listDisplay the users.SYNTAX:where:user list [name = <string>][channel = <{ftp | telnet | ht

E-DOC-CTC-20061027-0004 v1.0User Commands729EXAMPLE:RELATED COMMANDS:{Administrator}=>user listUser Flags Role---- ----- ----Administrator U Admini

E-DOC-CTC-20061027-0004 v1.0User Commands730user rightsDisplay the session rights.SYNTAX:EXAMPLE:iThe user rights of the currently logged-in user are

E-DOC-CTC-20061027-0004 v1.0Wireless Commands73143 Wireless CommandsIntroductionThis chapter describes the commands of the wireless command group.Cont

E-DOC-CTC-20061027-0004 v1.0Wireless Commands732wireless mssid ifadd Add an extra SSID context. 766wireless mssid ifdelete Delete an SSID context. 767

E-DOC-CTC-20061027-0004 v1.0Wireless Commands733wireless ifconfigConfigure the wireless settings.SYNTAX:where:wireless ifconfig [state = <{enabled

E-DOC-CTC-20061027-0004 v1.0Wireless Commands734EXAMPLE:=>wireless] ifconfigState : enabledNetwork name (SSID) : SpeedTouchBF4511Public network (an

E-DOC-CTC-20061027-0004 v1.0Wireless Commands735wireless resetReset the wireless parameters.The following wireless parameters are reset to their defau

E-DOC-CTC-20061027-0004 v1.0ATM Commands52atm oam vclb addCreate a loopback connection for VC.SYNTAX:where:EXAMPLE:RELATED COMMANDS:atm oam vclb add p

E-DOC-CTC-20061027-0004 v1.0Wireless Commands736EXAMPLE:=>wireless ifconfigState : enabledNetwork name (SSID) : SpeedTouchBF4511Public network (any

E-DOC-CTC-20061027-0004 v1.0Wireless Commands737wireless debug statsShow the transfer statistics.SYNTAX:EXAMPLE:wireless debug stats=>wireless debu

E-DOC-CTC-20061027-0004 v1.0Wireless Commands738wireless debug txpowerTx power override.SYNTAX:where:wireless debug txpower [txpwr = <number>] t

E-DOC-CTC-20061027-0004 v1.0Wireless Commands739wireless macacl addAdd an ACL MAC entry.SYNTAX:where:EXAMPLE:wireless macacl add hwaddr = <hardware

E-DOC-CTC-20061027-0004 v1.0Wireless Commands740wireless macacl configConfigure the ACL mode.SYNTAX:where:EXAMPLE:wireless macacl config [control = &l

E-DOC-CTC-20061027-0004 v1.0Wireless Commands741wireless macacl deleteDelete an ACL MAC entry.SYNTAX:where:EXAMPLE:wireless macacl delete hwaddr = <

E-DOC-CTC-20061027-0004 v1.0Wireless Commands742wireless macacl flushFlush ACL entries.SYNTAX:where:EXAMPLE:wireless macacl flush proceed = <{disab

E-DOC-CTC-20061027-0004 v1.0Wireless Commands743wireless macacl listShow a list of all configured ACL entries.SYNTAX:EXAMPLE:wireless macacl list=>

E-DOC-CTC-20061027-0004 v1.0Wireless Commands744wireless macacl modifyModify an existing ACL entry.SYNTAX:where:EXAMPLE:wireless macacl modify hwaddr

E-DOC-CTC-20061027-0004 v1.0Wireless Commands745wireless macacl registerStart a registration process (only for register mode).PrerequisiteThe register

E-DOC-CTC-20061027-0004 v1.0ATM Commands53atm oam vclb delDelete a loopback connection for VC.SYNTAX:where:EXAMPLE:RELATED COMMANDS:atm oam vclb del p

E-DOC-CTC-20061027-0004 v1.0Wireless Commands746wireless multiuni addAdd a multicast to unicast mapping.SYNTAX:where:wireless multiuni add multicast =

E-DOC-CTC-20061027-0004 v1.0Wireless Commands747wireless multiuni deleteDelete all multicast mappings.SYNTAX:where:wireless multiuni delete multicast

E-DOC-CTC-20061027-0004 v1.0Wireless Commands748wireless multiuni flushFlush all multicast to unicast mappings.SYNTAX:wireless multiuni flush

E-DOC-CTC-20061027-0004 v1.0Wireless Commands749wireless multiuni listShow configured multicast to unicast mappings.SYNTAX:wireless multiuni list

E-DOC-CTC-20061027-0004 v1.0Wireless Commands750wireless multiuni scanresultsDisplay detected multicast mac addresses.SYNTAX:where:wireless multiuni s

E-DOC-CTC-20061027-0004 v1.0Wireless Commands751wireless qos configConfigure QoS settings.SYNTAX:where:EXAMPLE:wireless qos config [mode = <{disabl

E-DOC-CTC-20061027-0004 v1.0Wireless Commands752wireless qos apacconfigConfigure AP EDCA parameters.SYNTAX:where:EXAMPLE:wireless qos apacconfig [clas

E-DOC-CTC-20061027-0004 v1.0Wireless Commands753wireless qos staacconfigConfigure STA EDCA parameters.SYNTAX:where:EXAMPLE:wireless qos staacconfig [c

E-DOC-CTC-20061027-0004 v1.0Wireless Commands754wireless secmode configConfigure/show the security mode.SYNTAX:where:EXAMPLE:wireless secmode config [

E-DOC-CTC-20061027-0004 v1.0Wireless Commands755wireless secmode wepConfigure the WEP settings.SYNTAX:where:EXAMPLE:iIf the current security mode is W

E-DOC-CTC-20061027-0004 v1.0ATM Commands54atm oam vclb listList all VC loopback connections.SYNTAX:EXAMPLE:RELATED COMMANDS:atm oam vclb list=>atm

E-DOC-CTC-20061027-0004 v1.0Wireless Commands756wireless secmode wpa-pskConfigure the WPA-PSK settings.SYNTAX:where:EXAMPLE:iIf the current security m

E-DOC-CTC-20061027-0004 v1.0Wireless Commands757wireless secmode wpaConfigure the WPA settings.SYNTAX:where:EXAMPLE:iIf the current security mode is W

E-DOC-CTC-20061027-0004 v1.0Wireless Commands758wireless stations listList the currently associated stations.SYNTAX:where:EXAMPLE:wireless stations li

E-DOC-CTC-20061027-0004 v1.0Wireless Commands759wireless wds addAdd a Wireless Distribution System (WDS) station.SYNTAX:where:EXAMPLE:iUp to four WDS

E-DOC-CTC-20061027-0004 v1.0Wireless Commands760wireless wds configWDS configuration parameters.SYNTAX:where:EXAMPLE:wireless wds config [state = <

E-DOC-CTC-20061027-0004 v1.0Wireless Commands761wireless wds deleteDelete a WDS station.SYNTAX:where:EXAMPLE:wireless wds delete bssid = <hardware-

E-DOC-CTC-20061027-0004 v1.0Wireless Commands762wireless wds flushFlush all WDS stations.SYNTAX:wireless wds flush

E-DOC-CTC-20061027-0004 v1.0Wireless Commands763wireless wds listList the WDS stations.SYNTAX:EXAMPLE:wireless wds list=>wireless wds listSpeedTouc

E-DOC-CTC-20061027-0004 v1.0Wireless Commands764wireless wds scanresultsScan all networks.SYNTAX:where:EXAMPLE:wireless wds scanresults [rescan = <

E-DOC-CTC-20061027-0004 v1.0Wireless Commands765wireless mssid iflistMultiple SSID configuration.SYNTAX:where:wireless mssid iflist [ssid_id = <num

E-DOC-CTC-20061027-0004 v1.0ATM Commands55atm phonebook addAdd a new phonebook entry.SYNTAX:where:EXAMPLE:RELATED COMMANDS:atm phonebook add name = &l

E-DOC-CTC-20061027-0004 v1.0Wireless Commands766wireless mssid ifaddAdd an extra SSID context.SYNTAX:where:wireless mssid ifadd ssid = <string>

E-DOC-CTC-20061027-0004 v1.0Wireless Commands767wireless mssid ifdeleteDelete an SSID context.SYNTAX:where:wireless mssid ifdelete [ssid_id = <numb

E-DOC-CTC-20061027-0004 v1.0Wireless Commands768wireless mssid ifconfigConfigure an SSID context.SYNTAX:where:wireless mssid ifconfig ssid_id = <nu

E-DOC-CTC-20061027-0004 v1.0Wireless Commands769wireless mssid ifattachAttach a ssid context .SYNTAX:where:wireless mssid ifattach ssid_id = <numbe

E-DOC-CTC-20061027-0004 v1.0Wireless Commands770wireless mssid ifdetachdescription.SYNTAX:wireless mssid ifdetach

E-DOC-CTC-20061027-0004 v1.0Abbreviations77144 AbbreviationsThe table below lists all the abbreviations used in the CLI Reference Guide.Abbreviation D

E-DOC-CTC-20061027-0004 v1.0Abbreviations772EF Expedited ForwardingFCS Frame Check SequenceFTP File Transfer ProtocolGRE General Routing Encapsulation

E-DOC-CTC-20061027-0004 v1.0Abbreviations773NLPID Network Layer Protocol IDentifiersNTP Network Time ProtocolOAM Operation and MaintenanceOBC On Board

E-DOC-CTC-20061027-0004 v1.0Abbreviations774SSID Service Set IDentifierTCP Transmission Control ProtocolTFTP Trivial File Transfer ProtocolTKIP Tempo

E-DOC-CTC-20061027-0004 v1.0System Logging Messages77545 System Logging MessagesIntroductionThis chapter lists the different System Logging messages.C

E-DOC-CTC-20061027-0004 v1.0Contentsivdhcp client debug traceconfig ...

E-DOC-CTC-20061027-0004 v1.0ATM Commands56atm phonebook autolistShow the auto PVCs.SYNTAX:EXAMPLE:RELATED COMMANDS:iAuto PVCs are only shown if they a

E-DOC-CTC-20061027-0004 v1.0System Logging Messages776Auto-PVC ModuleConfiguration ModuleDHCP Client ModuleFacility Severity ContentsLOCAL5 WARNING AU

E-DOC-CTC-20061027-0004 v1.0System Logging Messages777DHCP Relay ModuleDHCP Server ModuleFacility Severity ContentsLOCAL2 WARNING DHCR relay: Dropping

E-DOC-CTC-20061027-0004 v1.0System Logging Messages778Dyndns ModuleFirewall ModuleFacility Severity ContentsDYNDNS WARNING <DYNDNS_ STR_ID> Conn

E-DOC-CTC-20061027-0004 v1.0System Logging Messages779LOGIN ModuleKernel ModuleLinestate ModuleNAPT ModuleFacility Severity ContentsAUTH NOTICE LOGOUT

E-DOC-CTC-20061027-0004 v1.0System Logging Messages780PPP ModulePPTP ModuleFacility Severity ContentsLOCAL0 WARNING PPP Link up (<intf name>)LOC

E-DOC-CTC-20061027-0004 v1.0System Logging Messages781RIP ModuleFacility Severity ContentsLOCAL1 INFO RIP Packet received from unknown interfaceLOCAL1

E-DOC-CTC-20061027-0004 v1.0System Logging Messages782Routing ModuleSession ModuleSNTP ModuleLOCAL1 INFO RIP IP Address <ip-address> not found i

E-DOC-CTC-20061027-0004 v1.0System Logging Messages783Software ModuleUPnP ModuleWireless ModuleFacility Severity ContentsKERN INFO SOFTWARE Copying al

E-DOC-CTC-20061027-0004 v1.0System Logging Messages784

E-DOC-CTC-20061027-0004 v1.0Supported Key Names78546 Supported Key NamesContentsThis chapter lists all the key names supported by the Thomson ST, that

E-DOC-CTC-20061027-0004 v1.0ATM Commands57atm phonebook deleteDelete an existing phonebook entry.SYNTAX:where:EXAMPLE:RELATED COMMANDS:iThis command i

E-DOC-CTC-20061027-0004 v1.0Supported Key Names786Supported IP ProtocolsFor more information on the listed IP protocols, see RFC1340 or www.iana.org.P

E-DOC-CTC-20061027-0004 v1.0Supported Key Names787Supported TCP/UDP Port NamesFor more information on the listed TCP/UDP port assignments, see RFC1340

E-DOC-CTC-20061027-0004 v1.0Supported Key Names788sntp 123 Y Y Simple Network Time Protocol (SNTP)ingres-net 134 Y Y INGRES-NET Servicenetbios-ns 137

E-DOC-CTC-20061027-0004 v1.0Supported Key Names789ntalk 518 Y Y NTalkutime 519 Y Y UNIX Timerip 520 - Y Local routing process (on site); uses variant

E-DOC-CTC-20061027-0004 v1.0Supported Key Names790Supported ICMP Type NamesFor more information on the listed ICMP type names, see RFC1340 or www.iana

E-DOC-CTC-20061027-0004 v1.0Supported Key Names791Supported System Logging FacilitiesFor more information on the listed System Logging facilities, see

E-DOC-CTC-20061027-0004 v1.0Supported Key Names792Supported System Logging SeveritiesFor more information on the listed System Logging severities, see

E-DOC-CTC-20061027-0004 v1.0Supported Key Names793Differentiated Services Code Point (DSCP)For more information on DSCP, see RFC3260.PHB PHB Name Bina

E-DOC-CTC-20061027-0004 v1.0Supported Key Names794

IndexE-DOC-CTC-20061027-0004 v1.0795Aaal5statsatm debug aal5stats 41actlisteth bridge dynvlan actlist 266addatm bundle add 27atm oam vclb add 52atm ph

E-DOC-CTC-20061027-0004 v1.0ATM Commands58atm phonebook flushFlush all the phonebook entries.SYNTAX:EXAMPLE:i1. Phonebook entries that areinuse,cannot

IndexE-DOC-CTC-20061027-0004 v1.0796add 55autolist 56delete 57flush 58list 59qosbookadd 60config 61ctdadd 62ctddelete 64ctdlist 65delete 66flush 67lis

IndexE-DOC-CTC-20061027-0004 v1.0797upgradeconfig 706upnp config 716user config 724wireless macacl config 740wireless secmode config 754wireless wds c

IndexE-DOC-CTC-20061027-0004 v1.0798txoptionsadd 126delete 127list 128relayadd 130config 133debugstats 131traceconfig 132delete 134flush 135ifconfig 1

IndexE-DOC-CTC-20061027-0004 v1.0799delete 221flush 222list 223modify 224dumpconfig dump 75dyndnsadd 228delete 229flush 230hostadd 234delete 235flush

IndexE-DOC-CTC-20061027-0004 v1.0800Ffirewallchainadd 341delete 343flush 345list 346config 336debugclear 347stats 348traceconfig 349flush 338leveladd

IndexE-DOC-CTC-20061027-0004 v1.0801ifconfig 379show 381rtlist 374gstatsatm debug gstats 42Hhostmgradd 384clear 386config 387delete 388flush 389list 3

IndexE-DOC-CTC-20061027-0004 v1.0802dhcp relay iflist 138eth bridge iflist 279eth bridge vlan iflist 301eth device iflist 304eth iflist 258igmp host i

IndexE-DOC-CTC-20061027-0004 v1.0803list 475stats 476list 473queueclear 477config 478list 480stats 481KKey namesDSCP 793ICMP type 790IP precedence 792

IndexE-DOC-CTC-20061027-0004 v1.0804list dsd debug connection list 212listobjectsmbus listobjects 521memm listobjects 536listtypesmbus listtypes 522lo

IndexE-DOC-CTC-20061027-0004 v1.0805Nnatconfig 562flush 563ifconfig 564iflist 565mapadd 566mapdelete 570maplist 571tmpladd 572tmpldelete 576tmplinst 5

E-DOC-CTC-20061027-0004 v1.0ATM Commands59atm phonebook listDisplay the current phonebook.SYNTAX:EXAMPLE:RELATED COMMANDS:atm phonebook list=>atm p

IndexE-DOC-CTC-20061027-0004 v1.0806root commandsping 4traceroute 5rtadddhcp server pool rtadd 178ip mcast rtadd 447ip rtadd 451ppp rtadd 596rtdeleted

IndexE-DOC-CTC-20061027-0004 v1.0807version 668startupgrade start 707statsconnection stats 97dhcp client debug stats 120dhcp relay debug stats 131dhcp

IndexE-DOC-CTC-20061027-0004 v1.0808Uunbindconnection unbind 100unloadobjectsmbus unloadobjects 527unsetenv unset 250updatedns server debug spoof upda

THOMSON Telecom BelgiumPrins Boudewijnlaan 472650 Edegemwww.thomson-broadband.com© THOMSON 2007. All rights reserved.E-DOC-CTC-20061027-0004 v1.0.

E-DOC-CTC-20061027-0004 v1.0ATM Commands60atm qosbook addAdd a new QoS book entry.SYNTAX:where:EXAMPLE:RELATED COMMANDS:atm qosbook add name = <str

E-DOC-CTC-20061027-0004 v1.0ATM Commands61atm qosbook configModify the QoS book configuration.SYNTAX:where:EXAMPLE:atm qosbook config [format = <{b

E-DOC-CTC-20061027-0004 v1.0ATM Commands62atm qosbook ctdaddAdd a Connection Traffic Descriptor (CTD).SYNTAX:where:EXAMPLE:atm qosbook ctdadd name = &

E-DOC-CTC-20061027-0004 v1.0ATM Commands63IMPORTANT NOTE:The Thomson ST always rounds up specified burst sizes to a multiple of 48 bytes (a multiple o

E-DOC-CTC-20061027-0004 v1.0ATM Commands64atm qosbook ctddeleteDelete a CTD.SYNTAX:where:EXAMPLE:RELATED COMMANDS:atm qosbook ctddelete name = <str

E-DOC-CTC-20061027-0004 v1.0ATM Commands65atm qosbook ctdlistDisplay all CTDs.SYNTAX:EXAMPLE:RELATED COMMANDS:atm qosbook ctdlist=>atm qosbook ctdl

E-DOC-CTC-20061027-0004 v1.0Contentsvdhcp server option instdelete...

E-DOC-CTC-20061027-0004 v1.0ATM Commands66atm qosbook deleteDelete a QoS book entry.SYNTAX:where:EXAMPLE:RELATED COMMANDS:atm qosbook delete name = &l

E-DOC-CTC-20061027-0004 v1.0ATM Commands67atm qosbook flushFlush all the QoS book entries.SYNTAX:iThe flush command does not impact previously saved c

E-DOC-CTC-20061027-0004 v1.0ATM Commands68atm qosbook listDisplay the QoS book.SYNTAX:EXAMPLE:RELATED COMMANDS:atm qosbook list=>atm qosbook listNa

E-DOC-CTC-20061027-0004 v1.0AutoPVC Commands694 AutoPVC CommandsIntroductionThis chapter describes the commands of the autopvc command group.ContentsT

E-DOC-CTC-20061027-0004 v1.0AutoPVC Commands70autopvc configConfigure autopvc.SYNTAX:where:autopvc config [mode = <{pseudo | passive | active}>]

E-DOC-CTC-20061027-0004 v1.0AutoPVC Commands71EXAMPLE:=>autopvc configAutopvc mode : passiveAutopvc type :Autopvc standard: unknownAutopvc pseudo :

E-DOC-CTC-20061027-0004 v1.0AutoPVC Commands72autopvc listShow the retrieved information.SYNTAX:where:EXAMPLE:autopvc list [table = <{Port | AtmLay

E-DOC-CTC-20061027-0004 v1.0Config Commands735 Config CommandsIntroductionThis chapter describes the commands of the config command group.ContentsThis

E-DOC-CTC-20061027-0004 v1.0Config Commands74config deleteDelete a user configuration file.SYNTAX:where:RELATED COMMANDS:config delete [filename = <

E-DOC-CTC-20061027-0004 v1.0Config Commands75config dumpShow the saved configuration file.SYNTAX:RELATED COMMANDS:config dumpconfig delete Delete a us